Survey of Compliance with Radiation Protection Standards in Diagnostic Imaging Centers of Khuzestan Province in 2015
Journal Title: Journal of Health Research in Community - Year 2017, Vol 2, Issue 4
Abstract
Introduction and purpose: The growing use of ionizing radiation in disease diagnosis necessitaes the appropriate use of devices and awareness regarding the principles of radiation protection. With appropriate adoption of personal protection equipment and compliance with the existing regulations in relation to protection of the buildings where sources of ionizing radiation are located in, the adverse effects of radiation can be curtailed to a great extent. Methods: In this descriptive, analytical, cross-sectional study, we investigated the rate of compliance with radiation protection standards of 45 radiography rooms in 32 diagnostic imaging centers in Khuzestan Province, Iran, 2015. The centers were chosen through random cluster sampling method. The data were obtained using open-ended interview and a checklist designed based on the recommendations of the International Commission for Radiation Protection and Atomic Energy Organization of Iran. Results: The compliance rates with regard to radiology room, radiology equipment, darkroom, and radiographer’s protection were 80.76%, 80.47%, 69.28%, and 93.12%, respectively. Maximum and minimum rates of compliance with the standards were related to performance of the cassette tray (100%) and hopper status (25%), respectively. Comparison of public and private imaging centers in terms of safety standards showed no significant differences (P>0.05).Conclusion: The observance of the radiation protection standards in Khuzestan Province was in a relativly desirable condition. However, there are some shortcomings in compliance with the principles of protection in the darkroom. In this regard, with recommend adopting protection measures such as timelyreplacement of processing solution, appropriate ventilation of darkroom, provisionof protection equipment and appliances, and protection training required for entering the darkroom.
Authors and Affiliations
farshid mahmoudi, Amirhossein Davoudian talab, Gholamreza badfar
ارزیابی عوامل خطر با استفاده از روش FMEA در یکی از صنایع تولید فرش و موکت استان مازندران
مقدمه و هدف: بیشترین فراوانی حوادث در صنایع مشاهده می شود. ارزیابی و مدیریت ریسک، زیربنای برنامه ریزی و ارائه راه حل کنترلی برای خطرات می باشد. در این راستا، پژوهش حاضر با هدف شناسایی خطرات و ارزیابی ریسک با استفاده از...
Challenges Affecting the Implementation of Hospital Accreditation in Iran: An Interpretive Structural Modeling Approach
Introduction and purpose: Accreditation is a process in which a foreign institution systematically measures and evaluates the credibility of an organization in terms of process, outcome, and structural indicators. This s...
Prediction of Traffic-induced Air Pollution in Suburban Roads using an Ozone Pollutant Modeling with a Regression Method
Introduction and purpose: Nowadays, traffic-induced air pollution factors are classified as destructive to the environment. Regarding an increase in urbanization and the number of cars, transportation, and movement of pa...
Comparison of Novel Ergonomic Postural Assessment and Rapid Upper Limb Assessment Methods for Evaluating the Posture of Employees in an Agricultural Equipment Manufacturing Company in 2017
Introduction and purpose: The observational methods are the most common techniques for postural assessment. Afterwards, preventive interventions for musculoskeletal disorders are performed as the best strategy. Therefore...
ارزیابی خطر ناشی از پسماندهای بهداشتی- درمانی با استفاده از روش تحلیل مقدماتی خطر (PHA)
مقدمه و هدف: مدیریت نامناسب پسماندهای بهداشتی- درمانی ( HCW: Health Care waste ) به دلیل خطرات بهداشتی برای سلامتی انسان و محیط زیست، یک معضل جدی در بسیاری از کشورهای در حال توسعه و ازجمله ایران به شمار می رود. هدف از ان...