Synthesis and characterization of composite nanofibers with VARTM and Electrospinning process
Journal Title: Carbon - Science and Technology - Year 2013, Vol 5, Issue 3
Abstract
Fiber-reinforced polymer composites have made tremendous advancements in the technology of engineering materials. To manufacture advance composite, quantity and size of reinforcement and failure of the composites play the important role. From various methods of manufacturing composites ,Vacuum Assisted Resin Transfer Molding (VARTM) was found to have high fiber weight fraction which contributes to enhance the mechanical properties of the two phase or three phase nanocomposite, Here we have compared the VATRM and Hand Molding with three different material systems and found the enhanced tensile and flexural strength of two phase composite and manufactured TEOS nanofibers using electrospinning process as secondary reinforcement to improve the interlaminar delamination three phase nanocomposite.
Authors and Affiliations
Sachin S. Chavan, P. V. Londhe, Mukesh K. Sinha
Keywords
Related Articles
- EP ID EP49904
- DOI -
- Views 251
- Downloads 0
Batch Kinetics, isotherm and thermodynamic studies of adsorption of strontium from aqueous solutions onto low cost rice-straw based carbons
Present study explored the feasibility of using waste rice-straw based carbons as adsorbent for the removal of strontium under different experimental conditions. The batch sorption is studied with respect to solute conce...
Energy from Biomass – Comparision of biogas production at ambient temperature and at mesophilic temperature in semicontenous anaerobic digester using vegetable market waste
Studies are conducted in semicontinuous anaerobic reactors of 2 L Capacity with effective volume of 1.5 L. Experiments were carried out in the mesophilic temperature range maintained at 35 °C in a thermostat, and paralle...
Green synthesis of CdFe2O4 nanoparticles and their application for vapor sensing
The work reported about preparation of nanocrystalline CdFe2O4 through an combustion method and characterization of their microstructural, morphological and gas sensing properties. The structural properties investigated...
KOH activated carbon multiwalled nanotubes
A protocol for chemical activation of Multi-walled carbon nanotubes (MWNTs) is presented. The modification of multi-walled carbon nanotubes is obtained by the solid / solid reaction between KOH and carbon nanotubes in a...
Experimental studies on improving the performance of electrochemical machining of high carbon, high chromium die steel using jet patterns
Electrochemical machining (ECM) is a non-traditional process used mainly to cut hard or difficult-to-cut metals, where the application of a more traditional process is not convenient. Stiff market competition and ever-gr...