Synthesis of robust controllers for the control systems of technological units at iron ore processing plants
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 2
Abstract
<p>In order to synthesize a robust system of control over technological units, an analysis of appropriate mathematical models was performed. The uncertainty of models of technological iron ore processing units was accounted for by connecting a diagonal block at the top using a fractional linear transformation.</p><p>To study robust control systems of technological units, we applied the following types of robust controllers: suboptimal H<sub>∞</sub>-controller, a controller that was synthesized using the method of circuit formation, and µ-controller. We performed an analysis of results of the study into indicators of robust quality and stability of control, created on the basis of these types of controllers.</p><p>The best results were obtained using μ-controller, which ensures a minimal overshoot value of 2 %. Reducing the order of the selected μ-controller to the fourth order was performed by approximation using the Hankel norm. Under such a condition, a root-mean-square error relative to the base controller is 0.027.</p><p>Results of present research could be used in the synthesis of control over technological iron ore processing units under conditions of uncertainty in parameters. </p>
Authors and Affiliations
Vladimir Morkun, Natalia Morkun, Vitaliy Tron, Svitlana Hryshchenko
Keywords
Related Articles
- EP ID EP527733
- DOI 10.15587/1729-4061.2018.119646
- Views 112
- Downloads 0
Construction of the method for building analytical membership functions in order to apply operations of mathematical analysis in the theory of fuzzy sets
<p>This paper considers four methods for finding parameters of the analytical expressions of sigmoids, data on which are given numerically. We have conducted a comparative analysis of the approximation effectiveness usin...
Analysis of the influence of the inter-wheel differentials design on the resistance of the car curved motion
<p>The method and results of the analysis of the influence of the inter-wheel differentials design and the corresponding proportionality factors for the additional locking torque on the curved motion resistance of the fo...
Studying the effect of the combined technology on durability of the shafttype parts
<p>Restoration of shaft parts with extending their service life is an important reserve of development and growth of repair efficiency. Improvement of wear resistance and durability of parts of agricultural machinery is...
Defining a criteria for the identification of a technique for producing tomato juice
<p>The basis of modern analysis of the quality of juice products is a matrix approach. The essence of the matrix approach is to define a series of parameters, which comprehensively characterize the composition of juices....
Methods for multicriterial selection of optimal routes in communication networks
<p>Traditionally, the problems of routing in communication networks are solved based on the scalar approach, which takes into consideration only one quality indicator. However, information transmission in communication n...