System Identification and Control of Automatic Car Pedal Pressing System
Journal Title: Journal of Intelligent Systems and Control - Year 2022, Vol 1, Issue 1
Abstract
This paper mainly explores the system identification and control of an automatic car pedal pressing system. Specifically, the system identification was achieved using an artificial neural network, with the help of MATLAB’s System Identification Toolbox. The proportional-integral-derivative (PID) controller and fuzzy logic controller were designed, and normalized with membership functions. These functions were scaled with a gain as a scaling factor. The controller gains were tuned by a metaheuristic algorithm named particle swarm optimization (PSO). On this basis, the two controllers were compared with a number of performance indices, including integral squared error (ISE), integral absolute error (IAE), integral time absolute error (ITAE), and mean squared error (MSE). The car pedal pressing performance was measured at different speed levels for each controller.
Authors and Affiliations
Lai Chong Jin, Azrul Azim Abdullah Hashim, Salmiah Ahmad, Nor Maniha Abdul Ghani
Critical Parameter Analysis for Optimized Gliding Performance of Autonomous Underwater Vehicles
Underwater gliders have become a focal point in marine research due to advancements in maritime technologies and the increasing demand for versatile autonomous underwater vehicles (AUVs) in applications such as oceanogra...
Enhanced Interval State Estimation for Uncertain Systems
The quality of state estimation in uncertain systems exerts a significant impact on the performance of control systems. Within these uncertain systems, set-valued mappings introduce output uncertainties, complicating the...
System Identification and Control of Automatic Car Pedal Pressing System
This paper mainly explores the system identification and control of an automatic car pedal pressing system. Specifically, the system identification was achieved using an artificial neural network, with the help of MATLAB...
Efficiency Improvement of Induction Motors Based on Rotor Slot and Tooth Structures
Due to simple structure, easy maintenance and low cost, induction motors (IMs) are widely applied in various industries, accounting for 60-80% alternating current (AC) motors used in industry. However, the efficiency of...
Advancements in the Design and Automation of Biomimetic Ornithopters: An Investigation into Flapping-Wing Flight Control
Unmanned Aerial Vehicles (UAVs), in the form of ornithopters, which emulate avian flight through wing flapping, have been the focus of this investigation. The remarkable maneuverability of birds and insects, often lackin...