Technical–Economic Evaluation Subsystems Energy Production Systems within the Light Parameter "Energy Intensive"
Journal Title: RECENT - Year 2009, Vol 10, Issue 27
Abstract
The selection of the system’s efficiency parameter as an essential technical one, having a major influence over the production system is justified because it directly influences the costs of the PS products, the PS expenses with energy and the technical efficiency of the production system. The efficiency is a parameter that differs from one system to another and represents an important element taken into consideration in the moment of adoption the investment decision.
Authors and Affiliations
Vladimir MĂRĂSCU-KLEIN, Claudiu COVRIG, Cristina FILIP, Luciana STAN
Keywords
Related Articles
- EP ID EP97043
- DOI -
- Views 55
- Downloads 0
Tantalum Based Thin Films Preparation, Structures and Properties
Tantalum based thin solid films have found increased applicability in a wide range of fields, in particular in microelectronic devices, due to their superior properties, caused mainly by their main component and its resp...
Research on Reconditioning Agricultural Plough by Applying Welding Hardfacing
The paper shows the components of agricultural utilities: plough and knives of the cultivators who suffer the wear processes during operation. These components are studied by the degree of wear and are fixed by welding t...
Loading Thermal Cycles Produced by Welding Steel Molds and X 30 WCrV9 3 and 55 NiCrMoV 6
The paper presents the influence of thermal cycles upon the thermally influenced area by the loading by welding procedures, 111, 136, 141 EN 287-1/2004 of the materials X 30 WCrV9 3 and 55 NiCrMoV 6 from which hot workin...
FOR A BETTER CONTROL OF THE AVAILABILITY OF THE INDUSTRIAL EQUIPMENTS
Each one can intuitively understand that maintenance is significant because if equipment breaks down, the production can be stopped. In a system with tended flows or there are few intermediate stocks, such a stop can put...
Aesthetic Surfaces Based on Epicycloids and Orthocycloids, Generated by Vibro-Rolling
In this paper are presented the procedures at vibro-rolling by which can be obtained surfaces that have flaws with regular forms with particularly aesthetic appearance. These surfaces may be exterior surfaces of some pro...