Technological conditions of diffusive boride coating formation on silicon carbide and molybdenum disilicide
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
Basic directions of the diffusive boride coating formation on reaction-sintered silicon carbide and molybdenum disilicide are described. Technological conditions of non-metal ceramic materials boriding depending on the consideration of the amorphous boron concentration in the powder mixture are investigated and analyzed. It is determined that it is possible to speed up the rate of saturation process of the silicon carbide and molybdenum disilicide with boron by introducing sodium and aluminum fluorides as activating agents. Based on the carried out researches, optimal conditions for choosing the concentration of activating agents providing high saturation speed and improve operational parameters of the products are offered. It is also defined that to stimulate the process of boriding reaction-sintered ceramic materials, titanium hydride should be introduced into the saturated environment as the activating agent. Diffusion saturation of metals and alloys in hydrogen environment provides high saturation rate and good quality of the treated surface. The results of the carried out investigations prove that the saturation ability of the boride mixture increases significantly by introducing sodium fluoride and titanium hydride into it.
Authors and Affiliations
Vasyl Kovbashyn, Igor Bochar
Keywords
Related Articles
- EP ID EP373071
- DOI 10.33108/visnyk_tntu2018.02.087
- Views 63
- Downloads 0
The effect of initial deformations of the thick plate on its contact interaction with the ring punch
The calculation of the structural elements and mechanisms strength is one of the most important stages while their developing. Initial deformations are almost always available in the structural elements and machine parts...
Rationing signals from eddy current transducer for faithful comparison
The problem of detecting metal objects in different environments has always been important. Optimal for dichotomous distinction metals are impulsive VLF metal type. Transmitting antenna of the metal detector emits primar...
Load transfer from the infinite stringer to the two jammed along one edge identical stripes with initial (residual) stresses
The article is devoted to problems of contact interaction of infinite elastic stringer and two identical jammed along one edge pre-stressed stripes. The research has been conducted in the framework of linearized theory o...
Determination of non-intensive light flux intensity after propagation through layered biological environment
The results of the research of the problem of determining the intensity of the light flux of low intensity after its propagation through the layered bioenvironment are given. It was defined that the transfer of radiation...
Numerical realization of probabilistic model of composite material taking into account the damage evolution at high impact velocities
A numerical simulation of strength of plates of a fiber-reinforced multicomponent composite material under impact with collision velocities ranging from 20 to 1500 m/s was made using the probabilistic model within the fr...