TEMPERATURE OF THE TOP LEVEL SURFACE OF PARTS OF AGRICULTURAL SOIL TILLING MACHINERY. PART II – THERMOVISION MEASUREMENTS
Journal Title: Tribologia - Year 2015, Vol 260, Issue 2
Abstract
Using a thermal camera, the temperature distribution of the surfaces of ploughshares, subsoil shanks, and cultivator tooth coulters was determined. These parts worked in soil conditions during operation in the field. The ploughshares’ temperature distribution was more diverse than subsoil shanks and cultivator tooth coulters. The front parts of the ploughshares had the highest temperature (in particular soil tillage with low moisture ~ 8.4%). This shows a heavy load from the ground. Moreover, the subsoil shanks, and cultivator tooth coulters’ temperatures were similar with a slight increase of the half-length their parts.
Authors and Affiliations
Piotr KOSTENCKI, Tomasz STAWICKI, Paweł SĘDŁAK
Keywords
Related Articles
- EP ID EP258922
- DOI -
- Views 59
- Downloads 0
MODIFYING THE LUBRICATING PROPERTIES OF OILS USED IN JET ENGINES AND FLIGHT CONTROL SYSTEMS
The article presents the problems of lubrication and types of lubricants used in jet engines. The results of tribological properties were presented: weld point Pz, load-wear index Ih, last nonseizure load Pn, seizure loa...
THE INFLUENCE OF THE LOAD AND JOINT CARTILAGE ELASTICITY MODULES ON SYNOVIAL FLUID VISCOSITY
During classical journal bearing lubrication the lubricant viscosity is independent of physical properties of cooperating bodies, which is well known by virtue of Hersey-Stribeck (H-S) curve presenting friction coefficie...
THE TRIBOLOGICAL CHARACTERISTICS OF Al-Si/GRAPHITE COMPOSITES
The paper presents the results of tribological research on AlSi12CuNiMg/5.7 wt.% Gr aluminium composite material (containing graphite particles in the amount of 5.7% wt.%) and on its matrix. This composite is used as hig...
BADANIE WŁAŚCIWOŚCI ŻELIWA SFEROIDALNEGO STOPOWANEGO LASEROWO
Zwrócono uwagę na możliwości wykorzystania stopowania laserowego borem w odniesieniu do elementów wykonanych z żeliwa. Zaprezentowano wyniki badań pozwalające na wytworzenie ciągłej warstwy na powierzchni zewnętrznej tul...
ANALIZA STOPNIA USZKODZENIA ZMĘCZENIOWEGO HYDROTERMICZNEGO WARSTWY WIERZCHNIEJ KOMPOZYTÓW POLIMEROWO-CERAMICZNYCH PRZEZNACZONYCH DO EKSPLOATACJI W WĘŹLE BIOTRIBOLOGICZNYM
W pracy podjęto problem oceny jakości eksploatacyjnej warstwy wierzchniej (WW) kompozytów polimerowo- ceramicznych. Tworzywa te są stosowane w stomatologii zachowawczej do odtwarzania cech geometrycznych zębów ludzkich b...