Testing DFT ability to predict the stereoselectivity of group 4 metallocenes in propylene polymerization
Journal Title: Polyolefins Journal - Year 2014, Vol 1, Issue 2
Abstract
In this study we have tested the ability of a standard DFT computational protocol to reproduce the experimentally obtained stereoselectivity of 26 different C2-symmetric zirconocene catalysts active in propylene polymerization. The catalysts were chosen for their relevance in metallocene catalyzed polymerization of propylene. To this end, primary insertion of both si- and re-propylene enantiofaces into the Zr-CH2-CH(CH3)2 bond was considered to simulate the growing chains step. The energy difference between these two transition states, ΔEre-si, was taken as a measure of the stereoselectivity (pentad: mmmm%) of different catalysts. The results clearly indicated that there was a good agreement between ΔEre-si and the mmmm% values, so that greater ΔEre-si could correspond to higher mmmm%. A model was fitted to the experimentally obtained mmmm% against theoretical ΔEre-si. The coefficient of determination (R2) of the resultant plot was 0.9793, which indicated a good accuracy of the model. Finally, to quantify the steric role of the studied ligands in the observed stereoselectivity, the analysis of the buried volume (VBur) and of the steric maps was performed for two representative complexes. The images revealed that a greater asymmetric localization of the %VBur around the metal center led to a higher mmmm% in the resultant polymer.
Authors and Affiliations
Naeimeh bahri-Laleh, Laura Falivene, Luigi Cavallo
Keywords
Related Articles
- EP ID EP283078
- DOI 10.22063/POJ.2014.1100
- Views 140
- Downloads 0
Production of titanium tetrachloride (TiCl4) from titanium ores: A review
Titanium (Ti) is the ninth most abundant element on earth. The titanium mineral ores are widely distributed in different parts of the world. The two main ores of titanium include rutile (TiO2) and ilmenite (FeO.TiO2). It...
Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization
Chromium-vanadium (Cr-V) bimetallic catalysts are prepared by the introduction of vanadium into the Phillips catalyst which is one of the most significant industrial ethylene polymerization catalysts for tuning the Phill...
Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor
Pyrolysis of low density polyethylene (LDPE) by equilibrium fluid catalytic cracking (FCC) was studied in a stirred reactor under different process parameters. In this work, the effect of process parameters such as degra...
Theoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process
In this study, thermoplastic polyolefin elastomeric (TPO) nanocomposites were fabricated by friction stir processing. The effect of different pin geometries on clay dispersion and mechanical properties of the TPO nanocom...
Synthesis and identifcation of polystyrene via conventional and controlled radical polymerization methods: Effect of temperature, initiator and transfer agent on molecular weight and reaction rate
Polystyrene (PSt) has been known as one of the important polymers with a wide range of applications. Ability to synthesize PSt with different but predictable molecular weights for various applications is very important i...