THE CONTROL OF INCIPIENT STATE TREATING TOOL WEAR WITH USAGE OF ACOUSTIC EMISSION
Journal Title: Вісник Національного Авіаційного Університету - Year 2017, Vol 71, Issue 2
Abstract
Purpose: The aim of this article is the experimental research of acoustic emission at composite material machining with the analysis of influencing treating tool wear from composite material on registered signals parameters. Methods: In the basis of researches lies the processing and analysis of interconnection experimental acoustic emission signals parameter, which one appear at composite material machining, with treating tool wear. The acoustic emission at initial and final stage of composite material machining are esteemed. The statistical processing of acoustic emission amplitude parameters on these stages was conducted. The statistical data processing with the analysis regularity change of acoustic emission signals amplitudes distribution kurtosis is conducted. Results: Is determined, that the increase of composite material machining time does not result in change of acoustic radiation nature. The registered acoustic emission signals are continuous signals. Is established, that at composite material machining final stage is watched decreasing of acoustic emission signal amplitude average level and value of its deviation. Is determined, that the gradual or instantaneous increase of treating tool wear results in its destruction and sharp decreasing of acoustic emission signal amplitude. The regularity change of acoustic emission signals amplitudes distribution kurtosis at all stages of composite material machining is established. Discussion: The analysis of acoustic emission statistical amplitude parameters change at initial and final stage composite material machining is conducted. Decreasing of acoustic emission statistical amplitude parameters at final stage of machining is shown, that is conditioned by treating tool wear. It is shown, that originating and development of treating tool wearing up to an instant of its damage results in minor decreasing of acoustic emission signal amplitude average level. At the same, at early stage, which one will precede to tool damage, there is a discontinuous of acoustic emission signals amplitudes distribution kurtosis change from stable positive value up to negative value. At the moment of tool disastrous damage the nature of acoustic emission signals amplitudes distribution kurtosis change varies on inverse. Such change of acoustic emission parameters, apparently, is conditioned by originating the processes leading to tool destruction, and, as a consequent, change of treating and treated composite materials conditions interplay. The obtained outcomes have shown that the processing and analysis of regularity of acoustic emission signals amplitudes distribution kurtosis change can be utilized for control of composite materials technological process machining. Thus it is possible to determine and control the moment of processes originating incipient state, which one conduct to destruction of the treating tool.
Authors and Affiliations
Sergii Filonenko, Oleg Zaritskyi
Keywords
Related Articles
- EP ID EP459682
- DOI 10.18372/2306-1472.71.11747
- Views 130
- Downloads 0
CONTROLLING IN AIRLINE ENTERPRISES MANAGEMENT SYSTEM
Every company in the operation faced with problems of inefficient use of resources, leading to possible losses. To avoid these losses is recommended to implement c ontrolling in the system of airline en...
EUROPEAN COURT OF HUMAN RIGHTS AS THE GUARANTOR OF LEGAL PROTECTION OF A HUMAN IN THE FIELD OF AVIATION ACTIVITIES OF UKRAINE
Purpose: The effectiveness of human rights protection in the Council of Europe largely depends on activities of the European Court, which demonstrates high standards of justice, particularly in matters of human rights pr...
LYSIMETER - A UNIQUE TOOL FOR MONITORING THE INTERACTIONS AMONG THE COMPONENTS OF ENVIRONMENT
Modern lysimeter facilities in connection with meteorological stations allow monitoring and evaluation of mutual basic components of the environment, such as water, air, soil and vegetation. Water is the most important...
COMPARATIVE ANALYSIS OF TECHNILOGIES OF CHITOSAN PRODUCTION FROM DEAD BEES
Objective: The aim of this work is to study the characteristics of technology of chitosan obtaining from unconventional sources, namely from dead bees. Methods: The article considers three methods of chitosan obtaining f...
INFORMATION TECHNOLOGY IN LOGISTICS. THE TOOLS FOR PROCESSES OPTIMISATION IN MANAGING AN ENTERPRISE – MULTI-CRITERIA OPTIMISATION
The concepts of optimization, op timal, are very natural elements of our normal (everyday, colloquial) vocabulary, which are used – and one can even risk a st atement overused - in situations when you wan...