The Dynamic Simulation for a Cold Rolling Mill Machine
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 2
Abstract
For a cold rolling mill machine that represents a mechanical system, the dynamics problems may be solved by using the differential equations of their movement. We must consider all the connections and couplings for the mill machine that have too elastic elements like: springs, shafts and axes deformed through torsion, spring bars, work rolls and back-up rolls. The vibrations of the mechanical system must be monitored in order to identify those components which cause problems when the damage of the mill occurs during the operation. In these mechanical systems, mobile rigid permanent couplings are used - which transmit shocks and vibrations - or stretch couplings - which, due to the elastic element, dampen shock and vibration. Vibrations can appear, too, because of rolling strip that can have undulations.
Authors and Affiliations
Ștefan DRAGOMIR
Keywords
Related Articles
- EP ID EP577277
- DOI -
- Views 84
- Downloads 0
Corrosion Behavior of Ni-P Coated Steel Strips
In addition to high hardness, Ni-P coatings obtained by the electroless method are widely used due to their high corrosion resistance. The corrosion resistance depends on the content of phosphorus in the coating. Various...
Fabrication and Characterization of Cobalt/Iron Composite Coatings
Cobalt/iron composite coatings are used in micro-equipments due to their high magnetic saturation values and Curie temperatures, as magnetic nanoparticles capable of killing cancer cells, for magnetic data storage and ma...
A Setup for Preparation of Glass-Carbon Coatings on TiO2-Nb2O5 Intended for Hip Joint Prostheses
A setup for preparation of glass-carbon coatings on TiO2-Nb2O5 ceramic materials, intended for implants for surgery of hip joint prostheses, is described. The setup described consists of vacuum tight ceramic chamber; pro...
Alumina Influence on the Corrosion Resistance of Composite Layers Ni-P-Al2O3
This paper aims to analyze the corrosion resistance of composite layers based on Ni-P matrix and disperse phase alumina of 10 µm size, present in amounts of 5, 10 and 20 g / L in the nickel plating bath. The influence of...
Copper Plating Corrosion Study in Certain Environments
Copper plating was performed on nickel substrate by means of the potentiostatic electrodeposition method from a sulphate electrolyte solution. The copper coatings morphology was studied by means of the optical and electr...