The Effect of Design Parameters of an Integrated Linear Electromagnetic Motor, At the Process of Pulling Away Anchor, From Its Breakaway Stage

Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 9

Abstract

This paper assess the influence of design parameters of ferromagnetic guide housing at the possess of pulling away the anchor from the holding device which is integrated in the design of the motor.The design of an integrated circuit and the equivalent magnetic circuit of the integrated LEMM on breakaway stage was built, mathematical models of system were laid out. An expression for its magnetic induction, with which you can set the beginning of saturation of the shunt, defining moment of pulling away anchor from the holding area. an expression is derived for its magnetic induction, with which you can set the beginning of saturation of the shunt, define moment of anchor pulling away from the holding area, the zone of permissible combinations of cross-sectional area of the upper magnetic shunt and holding area, and the zone of change in the magnetic induction in the yoke at the pulling away moment of the motor anchor.

Authors and Affiliations

Dr. Ginady G. Ugarov , Dr. Vladimir Iv. Moshkin , Dr. Amer Kh. Massad

Keywords

Related Articles

 An Effective Strategy of Firewall Based Matching Algorithm

  Here the perimeter oriented to the network based strategy where the crossing of the traffic plays a major role in its implementation based aspect in a well oriented fashion respectively. Therefore there is a neces...

 A review of Carbon Nanotube Reinforced Aluminium Composite and Functionally Graded composites as a Future material for Aerospace

 Material selection is a very critical issue when it comes to aerospace engineering. Materials should have good qualities like light weight, high strength and corrosion resistance with economic viability. Over the p...

Comparison of Spatial Interpolation Techniques - A Case Study of Anantnag District J&K, India

Groundwater is used for a variety of purposes, including irrigation, industrial, drinking, and manufacturing. Assessment and mapping of quality of groundwater is an important because the physical and chemical characteris...

 Analysis of Dual Resonant Solid State Tesla Transformer

In this paper, Analysis of dual resonant solid state tesla transformer (DRSSTS) is carried out. The  fundamental difference between this types of tesla transformer and spark gap tesla transformer, is using of one or...

 Modelling Nozzle throat as Rocket exhaust

 The ejector mode of rocket-based combined cycles is a concept that has the ability to gain thrust from atmospheric air and reduce fuel consumption and thus reduce the cost of rocket launches. This thesis develops...

Download PDF file
  • EP ID EP121661
  • DOI -
  • Views 79
  • Downloads 0

How To Cite

Dr. Ginady G. Ugarov, Dr. Vladimir Iv. Moshkin, Dr. Amer Kh. Massad (2014). The Effect of Design Parameters of an Integrated Linear Electromagnetic Motor, At the Process of Pulling Away Anchor, From Its Breakaway Stage. International Journal of Modern Engineering Research (IJMER), 4(9), 42-49. https://europub.co.uk./articles/-A-121661