The Effect of Explosıve Ratıo on Interface Formatıon in Explosıon Weldıng of Non Alloyed and Austenıtıc Steel Plates

Abstract

In this study, weldability of austenitic stainless steel sheet to DKP sheet metals by explosive welding and the effect of explosive ratio (Elbar 5) on the joint interface have been investigated experimentally. Experimental results show that austenitic stainless steel can be bonded to DKP sheet by using explosive bonding. The joint interface was transformed from line ar to wavy appearance within increasing explosive ratio with respect to upper plate weight. Moreover, with increasing explosive ratio, the wavelength and amplitude of waviness increased. Hardness measure indicate that the impact force leads to increase in hardness of the zone next to interface and outer surface of the plates.

Authors and Affiliations

Mehmet Serkan YILDIRIM, Ahmet DURGUTLU

Keywords

Related Articles

PEG-400 Supported Alumina Synthesis, Characterization and Investigation of Morphological Properties

In this study, α-alümina structures are successfully prepared via hydrothermal synthesis supported with PEG-400. The effect of the PEG-400 as structure directing agent on the particle size is investigated. The structural...

The Definition and Prediction of Stress Analysis of Plates with Elliptic Hole by Artificial Neural Networks

In this study, maximum tensile stress values on plates with elliptic hole which are exposed to tensile strength have been calculated. These calculations have been modelled by Artificial Neural Networks (ANN). Besides, fi...

Estimation of Inadequate Monthly Current Data for Zamanti River-Ergenusagi Station

The continuity of the streamflow data is of great importance to design practices on rivers. The missing measured data from the gaging stations can normally be estimated using those of collected from the hydrometeorogical...

Combustion, Performance and Emission Characteristics of Waste Olive Oil Biodiesel in a Direct Injection Diesel Engine

In this study, a single cylinder, direct injection diesel engine was run with biodiesel from waste olive oil and the effects of diesel-biodiesel fuel blends on combustion, engine performance and exhaust emissions were in...

Investigation of infrared GaAs photodetector instability

The IR photodetector instabilities in a single gap gas discharge IR image converter system with ionization type have been explored experimentally under the Townsend and glow discharge modes. In such systems under gas dis...

Download PDF file
  • EP ID EP484370
  • DOI -
  • Views 69
  • Downloads 0

How To Cite

Mehmet Serkan YILDIRIM, Ahmet DURGUTLU (2017). The Effect of Explosıve Ratıo on Interface Formatıon in Explosıon Weldıng of Non Alloyed and Austenıtıc Steel Plates. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 5(3), 247-254. https://europub.co.uk./articles/-A-484370