The Effect of Friction Behaviour and Wear Protection Ability of Selected Base Lubricants on Tribo-pairs Parameters of Machine Components
Journal Title: Tribology in Industry - Year 2018, Vol 40, Issue 4
Abstract
The experimental tests of selected tribo-pair in three loading cycles were compared in this paper. Tests were performed with mineral transmission oil and ecological synthetic ester base oil, which were dropping by Gravity Force through the overhead part of measuring head of the laboratory testing device. The influence of factors (load cycle, lubricant) on the bearing shells and shafts was statistically verified by analysis of variance (ANOVA). The relevant differences between average values of each specimens were defined using Duncan`s multiple range test with a p-value of 0.05. Dynamically loaded tribo-pairs showed bigger mass losses and higher friction coefficients compared to the static cycle in conditions of the experiment, regardless of the lubrication method. This effect was even more significant in environment lubricated with mineral oil. Results confirmed that processes of dynamic loading play a significant role in evaluating selected parameters (wear, friction force, friction coefficient) tribological nodes of agricultural, forestry and other industrial machines.
Authors and Affiliations
S. Kopčanová, M. Kučera, V. Kučerová
Keywords
Related Articles
- EP ID EP460470
- DOI 10.24874/ti.2018.40.04.14
- Views 69
- Downloads 0
Experimental Study of Frictional Vibrations Under Dry Friction Conditions
The paper discusses issues related to dynamic characteristics of friction. Vibrations are analyzed on “indenter on disk” system using brass and steel samples as an example. “Indenter on disk” system is changed by additio...
Prediction of Coated Tools Performance in Milling Based on the Film Fatigue at Different Strain Rates
The knowledge of coated tool wear mechanisms in milling is pivotal for explaining the film failure and selecting the appropriate cutting strategy and conditions. In this paper, tool wear experiments were carried out in m...
Improving Efficiency of the Surface Plastic Covering Deformation of Billets from Aluminum Alloys
The current work is an experimental study of a new combined technology based on the plastic deformation. The test specimens and the drawplate used in the experiment possess regular microgeometry surfaces and are respecti...
Dynamics and Lubrication Problem Analysis of Main Bearings for IC Engines Based on Coupling between a Crankshaft and a Flexible Whole Engine Block
The article presents the solution to the interconnected problem of main bearings dynamics for the forced internal combustion (IC) engine. For the crankshaft main bearings system of the (IC) engines it is necessary to con...
Diagnostics of Friction Bearings by Oil Pressure Parameters During Cycle-By-Cycle Loading
Failures of friction bearings of the crank mechanism comprise from 5 to 25 % of engine failures. The analysis of the main reasons for failures shows that the dominant reasons are the following: excess of loading conditio...