The Effects of the Welding Parameters on Tensile Properties of RSW Junctions of DP1000 Sheet Steel
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 4
Abstract
In this study, the maximum tensile shear load bearing capacity of the resistance spot welded DP1000 steel was measured and the tensile shear properties of the joints were evaluated. The effects of different welding parameters on microstructure, microhardness and tensile shear properties were investigated. Weld processes were performed by using 5kA and 7kA weld currents and 2-6bar electrode pressures. The microstructure of the welded materials was evaluated and the hardness profiles were determined. Experimental results showed that increasing electrode pressure and weld current increased the tensile shear load bearing capacity. It was also observed that the expulsion had a negative effect on the tensile shear load bearing capacity.
Authors and Affiliations
M. Elitas, B. Demir
Keywords
Related Articles
- EP ID EP168834
- DOI -
- Views 252
- Downloads 0
Effect of Shear Flow on Crystallization of Sydiotactic Polypropylene/Clay Composites
The high sensitivity of crystallization to shear flow is a subject of great research interest the last several years. A set of syndiotactic polypropylene/clay composite samples were used to examine the effect of shear fl...
Impacts of Soil Contamination on the Response of Piles Foundation under a Combination of Loading
The behavior of single piles driven into contaminated clayey soil samples subjected to a combination of static axial and cyclic lateral loadings have been studied in this research. A laboratory model was manufactured esp...
3D-CFD Simulation of Confined Cross-Flow Injection Process Using Single Piston Pump
Injection process into a confined cross flow is quite important for many applications including chemical engineering and water desalination technology. The aim of this study is to investigate the performance of the injec...
A Constrained Multi-Objective Learning Algorithm for Feed-Forward Neural Network Classifiers
This paper proposes a new approach to address the optimal design of a Feed-forward Neural Network (FNN) based classifier. The originality of the proposed methodology, called CMOA, lie in the use of a new constraint handl...
Color Channel Characteristics (CCC) for Efficient Digital Image Forensics
Digital image forgery has become extremely easy as low-cost image processing programs are readily available. Digital image forensics is a science of classifying images as authentic or manipulated. This paper aims at impl...