The Hill Chart Calculation for Pelton Runner Models using the HydroHillChart - Pelton Module Software
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2015, Vol 22, Issue 1
Abstract
he Pelton turbines industrial design is based on the hill chart characteristics obtained by measuring the models. Primary data measurements used to obtain the hill chart can be processed graphically, by hand or by using graphic programs respectively CAD programs; the HydroHillChart - Pelton module software is a specialized tool in achieving the hill chart, using interpolation cubic spline functions. Thereby, based on measurements of several models of Pelton turbines, a computerized library, used to design industrial Pelton turbines can be created. The paper presents the universal characteristics calculated by using the HydroHillChart - Pelton module software for a series of Pelton runners.
Authors and Affiliations
Adelina Bostan, Dorian Nedelcu, Florin Periș-Bendu
Keywords
Related Articles
- EP ID EP448860
- DOI -
- Views 88
- Downloads 0
Influence of Thread Root Radius on Maximum Local Stresses at Large Diameter Bolts under Axial Loading
In the thread root area of the threaded bolts submitted to axial loading occur local stresses, higher that nominal stresses calculated for the bolts. These local stresses can generate failure and can reduce the fatigue l...
Influence of Stator Winding Resistance upon Maximum Torque of Reluctance Synchronous Motors
This paper starts from the conclusion that, in case of low power reluctance synchronous motors, it is imposed to consider the resistance of the armature winding because its value may not be neglected. In order to study t...
Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator
The safe operation of a hydro generator depends on its thermal regime, the basic conditions being that the temperature in the stator winding fall within the limits of the insulation class. As the losses in copper depend...
Considerations on Seismic Design of Installations using Natural Gas Fuel
The paper presents issues relating to existing standards underlying seismic design restrictions for non-structural components (NSC) related to constructions. Are presented measures that can be implemented to maintain a h...
Mechanical Tests of the Dissimilar Welded Samples by Friction
The paper presents the experimental achievement of heterogeneous joints, with dissimilar materials, as well as the analysis of these joints by mechanical and metallographic tests. After traction testing of the specimens,...