THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE
Journal Title: Journal of Vocational Health Studies - Year 2019, Vol 3, Issue 1
Abstract
Background: Acrylic resin is the most commonly used denture base material. One disadvantage is that it can absorb water that can cause changes in dimensions. Changes in the dimensions of acrylic resin are influenced by processing acrylic resin. At present injection molding techniques are known to be better than compression molding. Dimension changes due to water absorption occur in the first 7 days and interval intervals of up to 12 days. Purpose: this study was to determine whether immersion of acrylic resin with Injection molding techniques had an effect on changes in dimensions. Method: The study was conducted on acrylic resin test rods with a size of 25 mm x 25 mm x 5 mm. by using injection molding techniques. Acrylic resins are immersed in water for 24 hours, 48 hours and 12 days. Changes in dimensions are measured using a caliper with an accuracy of 0.01 mm. Statistical analysis was performed using the normality test, homogeneity test, and ANOVA test. Results: this study found that there was no change in dimensions of acrylic resin with water-immersed injection molding techniques 24 hours, 48 hours and 12 days. Conclusion: That immersion of acrylic resin in water at 24 hours, 48 hours, and 12 days with injection molding techniques did not affect changes in dimensions.
Authors and Affiliations
Endang Kusdarjanti, Mia Laksmi L. , Okti Setyowati
Keywords
Related Articles
- EP ID EP639604
- DOI 10.20473/jvhs.V3.I1.2019.6-10
- Views 199
- Downloads 0
THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE
Background: Acrylic resin is the most commonly used denture base material. One disadvantage is that it can absorb water that can cause changes in dimensions. Changes in the dimensions of acrylic resin are influenced by p...
COPING MANUFACTURED TECHNIQUE OF SPINELL SLIP CAST ALL CERAMIC BY CONVENTIONAL METHODS AND CAD/CAM
Background: Ceramic restorations is divided into two kindsnamelyPorcelain Fused to Metal (PFM) and all-ceramic restorations. In ceram spinell is one of the materials needed for manufacturing anterior coping of all cerami...
MEASUREMENT OF STUDENT SATISFACTION INDEX VALUE TO IMPROVE EDUCATION QUALITY OF RADIOLOGY IMAGING TECHNOLOGY STUDY PROGRAM UNIVERSITAS AIRLANGGA
Background: Measurement of student satisfaction index is part of internal quality assurance in education, which is nowdays becoming a main topic in higher education. At Radiologic Imaging Technology, there has been no re...
THE CORRELATION OF CHEMICAL EXPOSURE AND PERSONAL HYGIENE WITH IRRITANT CONTACT DERMATITIS AMONG WORKERS IN THE PRODUCTION WORKER
Background: The production process at PT. X using oxalic acid as a mixture of Gum Rosin and Turpentine. Oxalic acid is corrosive and toxic and readily oxidized by water and oxygen that can cause irritation, rashes, burns...
FACTORS RELATED TO UNSAFE BEHAVIOR OF PILE WORK AT PT WASKITA KARYA (PERSERO) HIGHWAY PROJECT KLBM SECTION 2 WADUK BUNDER AREA
Background: Occupational accidents are generally caused by 2 main points of unsafe action and unsafe condition. Several previous studies have shown that unsafe behavior significantly affects the onset of occupational acc...