The impact of the modelling method of the front loader on the accuracy of the FEM calculations results
Journal Title: Journal of Research and Applications in Agricultural Engineering (ISSN 1642-686X) - Year 2018, Vol 63, Issue 4
Abstract
The article discusses selected issues of front loader modelling for the needs of FEM calculations. Particular attention was paid to the necessity of correct modelling clevis pin connections and hydraulic cylinders. In the case of hydraulic actuators, the effects of a different approach in modelling the actuators on the quality of the structure under operating load were demonstrated. Differences in the modelling cylinders equipped with a hydraulic lock and cylinders connected in parallel without locks were taken into account. The results of calculations obtained on the examples are discussed and the methodology of self-control of the results of FEM computations is presented. Some examples of various machines and possible errors during strength analyzes were also presented.
Authors and Affiliations
Janusz Rutkowski
Keywords
Related Articles
- EP ID EP515154
- DOI -
- Views 69
- Downloads 0
The influence of air stream generated by drone rotors on transverse distribution pattern of sown seeds
The paper presents the results of research on the influence of the air stream produced by produced by the drone on the transverse distribution pattern of the rye seeds. The seeds were spread by a small electric seeder wi...
Properties comparison of vegetable oils as lubricants
The analysis of the properties of vegetable oils used in tribology as lubricants is presented. Oil-based lubricants, which get into the natural environment during exploitation, have a destructive effect on living organis...
Description of energy balance for selected refrigeration furniture
Food is a product that breaks down quickly and easily. Therefore, it require storage at a low and controlled temperature. Maintaining a constant temperature inside the refrigeration furniture requires removal of the hea...
Estimation of longitudinal precipitation of liquid indicator (LPLI) with the use of the artificial neural network (MLP, RBF) models
The study presents the results of the analysis of two artificial neural networks as models of relationships between longitudinal precipitation of liquid indicator and selected technical and technological factors of spray...
Modeling of carrot root with the use of photoelasticity method
This paper presents elastooptical method for assessment of carrot root displacement under impact load. The main purpose of this study involved an analysis of cross-section model of carrot root performance. The investigat...