The Influence of High-Dispersed Barium Titanate, in Films With Addition of, and Based on Poly(Vinylidene) Fluoride), on Structure and Electrophysical Properties of Ones
Journal Title: Фізика і хімія твердого тіла - Year 2017, Vol 18, Issue 4
Abstract
With the aim of creation of effective electret materials, the composite films, based on poly(vinylidenefluoride) (PVF), in addition with segnetoelectric of barium titanate (BaTiO3) were obtained in concentrationrange of 0.5 – 5.0 %vol. It is established, that presence of BaTiO3, at low content of, leads to increase ofcrystallinity degree, and, practically, have no influence on, when at content of 1.0 – 5.0 % vol. of. There arePVF’s melting temperature range becomes narrower, when at 0.5 – 1.0 % vol. of, and, this pointing on morehomogeneous crystallite formation by dimensions in. When at high content (5.0 % vol.) of BaTiO3, there isdecrease of crystallization temperature observed (at 5 ºC), and then, there is temperature range broadening exists,and this pointing on forming of larger, but less homogeneous crystallites by dimensions in. It is determined, whenin composite films of PVF - BaTiO3 , that surface charge is more stable at BaTiO3 content of 4.0 %vol. in, andthen, one reaches value of 10-6 Cl/m2, when at conditions of treatment with electric field and crown discharge,and, at film charge value of 500 kV/m in. There are non-linear dependence of dielectrical permittivity exists,either when at low, or very high frequencies, and this may be linked with influence of high-disperse addition onpolymer’s crystalline structure formation, and sub-surface layers of one.
Authors and Affiliations
L. S. Dzubenko, S. M. Makhno, O. O. Sapyanenko, P. P. Gorbyk
Keywords
Related Articles
- EP ID EP264123
- DOI 10.15330/pcss.18.4.409
- Views 83
- Downloads 0
Ellipsometric Study of the Zinc Selenide Natural Cleaves Oxidation
Measuring of ellipsometric parameters of the light reflected from the fresh cleaves surface of zinc selenide are conducted under atmospheric conditions during one year. It has been found that the process of cleaves surfa...
Thermodynamics of non-Newtonian fluids (drilling mud)
Using the method of pressure balance with balance energy forms, calculations are made hidrotermodynamichni mobile hydraulic flow in the well drilling fluids, water-based, which accumulate and transmit energy to other ele...
Promising Cathode Material for Lithium Power Sources LaFe0.5Cr0.5O3
Nanoscale powders of LaFe0.5Cr0.5O3 with perovskite structure were synthesized by sol-gel combustion method in this work. From X-rays phase analysis obtained material was consisted of one phase LaFe0.5Cr0.5O3 (space grou...
Molecular Dynamics Modeling of Thermal Conductivity of Silicon/Germanium Nanowires
The thermal conductivity of silicon/germanium nanowires with different geometry and composition has beenstudied by using the nonequilibrium molecular dynamics method. The thermal conductivity of the Si1-xGexnanowire is s...
Optical Absorption of Chalcogenide Glass Ga2S3-La2S3 Doped with Erbium
The glasses of the La2S3-Er2S3-Ga2S3 system were synthesized from the melted samples which where quenched in to the cold 25% solution of NaCl. Their optical absorption spectra were studied in the range of 1.2–2.9 eV at 8...