THE INFLUENCE OF SURFACE FREE ENERGY ON TRIBOLOGICAL PROPERTIES OF OXIDE LAYER S FORMED ON ALUMINIUM ALLOY EN AW-5251
Journal Title: Tribologia - Year 2018, Vol 280, Issue 4
Abstract
This paper presents the influence of the parameters of the formation of oxide layers on the surface free energy and the tribological properties of these layers. The layers were formed electrochemically on aluminium alloy EN AW-5251, with variable values of electrolyte temperature and current density. A three-component electrolyte was used to produce oxide layers. The surface free energy was determined by the droplet deposition method by measuring the wetting angles, while the van Oss-Chaunhury-Good method was used for the calculations. Tribological tests were performed on a T-17 tribological tester under conditions of technically dry friction for reciprocating motion. T7W composite was used as a specimen in tribological tests.<br/><br/>
Authors and Affiliations
Mateusz NIEDŹWIEDŹ, Marek BARA, Władysław SKONECZNY
Keywords
Related Articles
- EP ID EP414835
- DOI 10.5604/01.3001.0012.7536
- Views 54
- Downloads 0
Projekt mikro- i nanotribologicznych badań chrząstki stawowej
INVESTIGATIONS OF THE STATIC FRICTION COEFFICIENT OF PE-UHMW POLYETHYLENE SUBJECTED TO THE IONIZING RADIATIONS
The paper describes an investigation of a static friction coefficient of PE-UHMW polyethylene subjected to ionizing radiations and aging, which imitated a biological influence of the human body on the tested material. Tr...
INCREASING THE SERVICEABILITY OF FRICTION PAIRS BY APPLYING A:C:H AND A:C:H:W DLC COATINGS
The paper discusses the results of structural and tribological tests conducted for a:C:H and a:C:H:W DLC coatings deposited on Co- Cr-Mo specimens using the PACVD process. The structure and morphology of the Co-Cr-Mo sub...
THE INFLUENCE OF THE LAYERED STRUCTURE OF POLYMER COATINGS ON THEIR EROSIVE RESISTANCE
The paper presents the results of erosive resistance investigation of three-layer epoxy coating systems with different compositions of surface layers. This layer was modified with glass microspheres or nanoparticles of a...
Charakterystyki tribologiczne roślinnych olejów bazowych dla olejów hydraulicznych
Zbadano i porównano właściwości smarne roślinnych baz olejowych w aspekcie zastosowania dla biodegradowalnych olejów hydraulicznych. Oleje bazowe należały do trzech różnych klas lepkości: VG 32, VG 46 i VG 68. Wytworzono...