The influence of the conditions of gypsum plaster preparation on its technological properties
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 2
Abstract
The results of researches on influence of basic preparation parameters, i.e. time and mixing intensity, start and end time of set, dimensional changes and strength of gypsum plaster, are presented in this paper. Determination of mentioned above parameters has a significant meaning because of their influence on quality of gypsum plaster and its susceptibility to even small disturbances during preparation. Tested plaster was prepared in vacuum mixer St. LOUIS 82. Time of mixing was 60÷360 sec., mixer arm rates 150÷420 rpm. It was demonstrated that mixing time influences strongly the setting time and expansion of gypsum plaster , and this influence growths with growing mixing intensity. The intense, short time mixing is beneficial from the viewpoint of dimensional changes minimizing. Minimizing the setting time is the most beneficial at low mixing intensity but significant dimensional changes appear during setting the plaster.
Authors and Affiliations
M. Pawlak
Keywords
Related Articles
- EP ID EP72201
- DOI -
- Views 108
- Downloads 0
Application of heat treatment and hot extrusion processes to improve mechanical properties of the AZ91 alloy
The main aim of this paper is to evaluate the effects of hot working (extrusion) and hest treatment on room temperature mechanical properties of magnesium-based AZ91 alloy. The results were compared with as-cast conditio...
TDA method application to austenite transformation in nodular cast iron with carbides assessment
In this paper the possibility of TDA method using to austenite transformation in nodular cast iron with carbides assessment is presented. Studies were conducted on cast iron with about 2% molybdenum and 0,70% to 4,50% ni...
Analysis of the influence oxygen and hydrogen during melting aluminium and his alloys
In the work was stated term the analysis of ion influences in melting codnuction of aluminium and his alloys. Influence from hydrogen and oxygen, hydrogen and oxygen and steam water together was distinguished. Where have...
Effect of dispersion hardening on impact resistance of EN AC-AlSi12Cu2Fe silumin
Development of modern technology have generated supply of better and better, more resistant structural materials not attainable earlier. Weight of metal structures is of a great importance, and as a consequence, also wei...
The influence of microstructure on the mechanical properties of metallurgical rolls made of G200CrMoNi4-3-3 cast steel
The subject of the study is the high-carbon tool cast steel G200CrMoNi4-3-3 used for metallurgical rolls, especially in section rolling mills. The test material was derived from a roll damaged in production; therefore, t...