The influence of the damaged reinforcing bars on the stress-strain state of the rein-forced concrete beams
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
The article is devoted to the overall view of experimental research of reinforced concrete beams with the simultaneous influence of the corrosion environment and loading. The tests have been carried out upon the reinforced concrete specimens considering the corrosion in the acid environment, namely 10 % H2SO4 that have been taken as a model of the aggressive environment. The beams are with span equalling to 1,9m with different series of tensile armature, concrete compressive strength and different length of impact of corrosion (continuous and local). The influence of simultaneous action of the aggressive environment and loading on strength of reinforced-concrete beams has been de-scribed. For a detailed study of the effect of individual components there was suggested additional experimental modelling of the only tensile armature damage without concrete damage. It will investigate the influence of this factor irrespective of the concrete.
Authors and Affiliations
Zenoviy Blikharskyy, Taras Shnal, Roman Khmil
Keywords
Related Articles
- EP ID EP261129
- DOI -
- Views 75
- Downloads 0
Influence of the environment aggressiveness on durability of girders made of S355 steel in Poland
The following article discusses the problem of durability of girders made of structural steel S355 affected by corrosion. It presents the Polish procedure for calculating the time between failures of steel elements of br...
Effect of finishing process on the surface quality of Co-Cr-Mo dental alloys
Preparatory procedures for the material have a significant influence on the surface stereometry of the material. This study investigated the effect of the electropolishing process on the surface quality of metallic prost...
Bending fatigue strength coefficient the low carbon steel with impurities
The article discusses the results of a study investigating the effect of the number of fine non-metallic inclusions (up to 2 µm in size) on the fatigue strength of structural steel during rotary bending. The study was pe...
Automatization in road transport: a review
In this article automatization of road transport is investigated. In the first chapter relevant international trends were identified. In this paper the research hypothesis is that in the case of automatized road vehicle...
Organizational learning in developing the integrated quality management
High quality is organizations’ competitive advantage. It is beneficial to base this on professional ap-proach, and basic concepts and definitions with scientific foundation. The necessary main concepts consist of quality...