THE INFLUENCE OF THE INJECTION TIMING ON THE PERFORMANCE OF TWO-STROKE OPPOSED-PISTON DIESEL ENGINE
Journal Title: Applied Computer Science - Year 2018, Vol 14, Issue 2
Abstract
The performance of the engine strongly depends on the parameters of the combustion process. In compression ignition engines, the fuel injection timing has a significant influence on this process. The moment of its occurrence and its duration should be chosen so that the maximum pressure value occurs several degrees after TDC. In order to analyze the effect of the fuel injection timing on the performance of the tested two-stroke opposed-piston diesel engine, a zero-dimensional model was developed in the AVL BOOST program. Next, a series of simulations were performed based on the defined calculation points for maximum continuous power, which resulted in power, specific fuel consumption and mean in-cylinder pressure. Finally, the engine map was made as a function of the start of combustion angle.
Authors and Affiliations
Paweł KARPIŃSKI
Keywords
Related Articles
- EP ID EP560614
- DOI 10.23743/acs-2018-14
- Views 70
- Downloads 0
NEURAL CONTROLLER FOR THE SELECTION OF RECYCLED COMPONENTS IN POLYMER-GYPSY MORTARS
This study presents research on the development of an intelligent controller that allows optimal selection of rubber granules, as an admixture recycling component for polymer-gypsy mortars. Based on the results of actual...
INTERMITTENT DEMAND FORECASTING USING DATA MINING TECHNIQUES
Intermittent demand occurs randomly with changing values and a lot of periods having zero demand. Ad hoc intermittent demand forecasting techniques have been developed which take special intermittent demand characteristi...
THE USE OF SIMULATION ENVIRONMENT FOR SOLVING THE ASSEMBLY LINE BALANCING PROBLEM
The paper describes the application of a simulation environment (Tecnomatix Plant Simulation) for solving a real manufacturing problem. The studied case consisted in rebalancing the production line with a specified numbe...
GRAPHICAL REPRESENTATIONS OF MULTITHREADED APPLICATIONS
This article contains a brief description of existing graphical methods for presenting multithreaded applications, i.e. Control Flow Graph and Petri nets. These methods will be discussed, and then a way to represent mult...
INJECTION SIMULATION FOR THE MOLD PROCESS IN THE MEDICAL INDUSTRY
This paper presents information on the methods of construction and selec-tion of materials, for the manufacturing of a medical device – a syringe filter. The main scope of the research was numerical simulation made in or...