The influence of the parameters of heat treatment on the mechanical properties of welded joints
Journal Title: Archives of Materials Science and Engineering - Year 2019, Vol 2, Issue 95
Abstract
Purpose: The main goal of the work is to determine the influence of the parameters of stress relief annealing on the mechanical and structural properties of welded joints made of chromium-molybdenum type 10CrMo9-10 steel. Design/methodology/approach: In the study, commercial 10CRMO9-10 steel was used, the Polish equivalent of 10H2M. This is a chromium-molybdenum toughened steel, i.e. after normalization (910-960°C) and high tempering (650-780°C). The materials were subjected to heat treatment, tests of mechanical properties, Charpy impact test, hardness of individual material zones, as well as macro and microscopic observations. Findings: The hardness tests indicated, that materials subjected to a single heat treatment possess the greatest hardness. Materials undergoing several heat treatments, possess hardness on a similar level to materials that have been annealed once, however they are characterized by low reproducibility of results. The most important parameter of heat treatment of the tested steel is heating up to a temperature of 690°C. Due to such heating, optimal mechanical properties are achieved, which results in long and safe exploitation of the produced elements. Research limitations/implications: The processes of heat treatment are very important to achieve optimal strength properties of welded joints. Practical implications: The development of energy worldwide has caused the creation of machines working in higher pressure and temperature ranges. The influence of temperatures decreases the service life of a given element. The adaptation and completion of the appropriate process of heat treatment extends the exploitation time of elements. Originality/value: Determining the mechanical properties of 10H2M steel, dependent on the temperature of heat treatment and heating time. It was concluded that the optimal parameter of heat treatment for the tested materials – is heating at a temperature of 690°C.<br/><br/>
Authors and Affiliations
K. Łuczak, W. Wolany
Keywords
Related Articles
- EP ID EP538794
- DOI 10.5604/01.3001.0013.1731
- Views 60
- Downloads 0
Comparison of structure and mechanical properties of implants produced by injection method
Purpose: The paper presents the possibility to improve the mechanical properties of dental implants produced of Ti6Al4V titanium alloy and possibility to use a new method to production those implants. The aim of the stud...
2D-Finite element analysis of inlay-, onlay bridges with using various materials
Purpose: To compare the impact of different bridge constructions and different loads onstress distribution in bridges.Design/methodology/approach: The study was conducted on 96 computer models ofboth premolars and molars...
Microstructure and properties of CoCr alloys used in prosthetics procedure
Purpose: The aim of this work was to define the influence of manufacturing technology on the chemical composition, surface topography, physicochemical and electrochemical properties of CoCr alloys obtained by casting tec...
A study on welding quality for the automatic vertical-position welding process based on Mahalanobis Distance method
Purpose: The welding quality and reducing production cost could be achieved by developing the automatic on-line welding quality monitoring system. However, investigation of welding fault to quantify the...
Thermal barrier coating on I.C engine cylinder liner
Purpose: In this research, Cerium Stabilized Zirconia is coated on the I.C engine cylinder liner using Plasma Spray Coating technique. The coating system has effects on the fuel consumption, the power and...