The Influence of the Ratio Cutting Depth/Nose Radius of TNMG160408-P30 Plate on the Cutting Thermocurrent at Cutting OLC45 Steel
Journal Title: RECENT - Year 2015, Vol 16, Issue 46
Abstract
At metals cutting with metallic edges it appears an electrical current due mainly to the temperature in the cutting zone. Because the temperature in the cutting zone shows how the cutting process develops and the resulted electrical current estimates precisely the temperature, results that the electrical current at cutting is a simple diagnose method due to the possibility to be measured with accuracy. The paper shows the influence of the ratio between the cutting depth and nose radius of TNMG160408-P30 metallic carbide plate at turning OLC45 steel. It was chosen the influence of the ratio between cutting depth and nose radius of the plate because the phenomenon during the cutting process are developing differently in the nose radius zone than in the rectilinear part of the edge. The paper shows this aspect.
Authors and Affiliations
Valentin DIŢU
Keywords
Related Articles
- EP ID EP122844
- DOI -
- Views 69
- Downloads 0
On Top Riser Working
In the case of castings that have a hotspot at the, top riser are normally used in industrial practice. It is envisaged that the hotspot is very close to the riser. It is considered that the liquid alloy flows more easil...
A MOVEMENT AND STRAIN MODEL OF THE BICYCLE
The bicycle is an extremely popular, non-polluting means of transportation and leisure, of ancient tradition and high perspectives. Therefore, the interest in manufacturing perfected bicycles with improved characteristic...
Constructive Particularities of a Mechanical Vulcanizing Press
The present paper addresses some of the structural and functional features of a mechanical vulcanizing press. Characteristic for this are the two distinct kinematics chains for the motion of the plates: a kinematics chai...
Practical Study of the Influence of Load Flow on the Cylindrical and Polygonal Sieves
Experimental research has established conditions under which one sieve can achieve optimum volumetric ranking efficiency. A direct influence in terms of efficiency of these machines has the material load flow in the siev...
Research on Metallic Lance Thermal Cutting of Building Materials
It was designed and executed a plant for thermal cutting of building materials (concrete), which uses besides oxygen and metal lance with beam wire, iron powder flow and bulk chemicals, which pass with oxygen inside the...