The method of dynamic stresses determination of media with tunnel cavities
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
The method of studying the dynamic stress state of elastic media with tunnel cavities under the non-stationary load as the system of concentrated forces, which are applied in the internal points of media, is developed. On the basis of the application of the Fourier transformation of time variable and the modification of the method of boundary integral equations for the case of the first exterior problem, the integral equations are written. The integral equations kernels are of the Cauchy type. In the paper for determination of hoop and radial stresses the analytic representations have been constructed. Applying the proposed in the paper method high accuracy of calculations in the study of transient processes is provided. On the basis of the proposed method the dynamic stress state of elastic media with tunnel cavities of different cross-sections under the impulse concentrated load is investigated.
Authors and Affiliations
Olena Mikulich, Vasyl’ Shvabjuk
Keywords
Related Articles
- EP ID EP373025
- DOI 10.33108/visnyk_tntu2018.02.019
- Views 55
- Downloads 0
Risk assessment of biocorrosion fracture of underground pipelines [in Ukrainian].
During long-term operation of underground pipelines in certain regions of Ukraine formed environmental hazards are formed, caused by the destruction of pipelines because of soil and microbiological corrosion. Unpredictab...
The comparative analysis of mathematical models of cyclic signals structure and processes
The article deals with the comprehensive research of the possibilities, perspectives and efficiency of the application of the popular mathematical models of cyclic signals and processes on the basis of mathematical suppo...
Mathematical model of boundary crack propagation at bending of symmetric thin-walled flanks
There was studied engineering methods for determining stress intensity factors for complex symmetrical cross-sectional flank open at the edge of the crack by the action of stretching and bending effort. Analysis of speci...
Defining parameters of elastic-safety clutches for screw conveyers
The designs of elastic-safety clutches of screw conveyors are offered allowing, except safety conditions, due to damping and elastic properties to ensure smooth start of conveyor screw while in drive run-up and reduce th...
Instrument for inner cylinder surfaces vibrating rolling and its structural parameters determination technique
Design of instrument for regular topography making by vibrating rolling on inner cylinder surfaces has been developed. It provides vibrorolling effort regulation for the materials with various physical and chemical prope...