THE METHOD’S OF COMPLEX ANALYSIS FOR THE SOLUTION OF PLANE PROBLEMS OF THE THEORY OF THERMOCONDUCTIVITY AND THERMOELASTISITY FOR MULTIPLY CONNECTED BODIES.
Journal Title: Հայաստանի գիտությունների ազգային ակադեմիայի տեղեկագիր․ Մեխանիկա - Year 2009, Vol 62, Issue 4
Abstract
During their service life, engineering structures are subjected not only to static and dynamic loads, but usually they are also affected by the presence of thermal fields. Thermal influences may sometimes alter the physic-mechanical properties of the materials and consequently, they may affect their strength properties and the resistance of the structure to loads. In the general case, the resulting expansions (contractions) are not occurring freely in the continuous medium. Instead, they produce thermal stresses which, in combination with the mechanical ones (due to external loading), can contribute to the initiation and propagation of cracks
Authors and Affiliations
D. I. Bardzokas, P. Lalou
Keywords
Related Articles
- EP ID EP602190
- DOI -
- Views 500
- Downloads 0
Way of Producing Porous-Free Long-Measured Blanks of Hot Extrusion
The blank porosity dependence on extrusion conditions is established: coefficient of drawing ( λ ), pressure (P), yield point (C), angle of the die ( α ) and initial porosity ( θ 0 ) . Appropriate transformations of form...
The solution of bending plates problem with uniformly normal load , which two opposite edges of the plate jointly supported, other two edges are free
This article is about the solution of plates bending problem with uniformly normal load, when two opposite edges of the plate jointly supported, other two edges are free is received. The problem is solved both by Kirchho...
The motion of cut in anisotropic medium.
c
On asymptotic method of static and dynamic boundary problems solution.
c
A Mixed Contact Problem for Two Moon-type Bodies.
c