The Modern State of Works in Field of Electron-Beam Technology of Melting and Evaporation of Metals and Non-Metals in a Vacuum
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
In developing of new processes for growing metal (composite) films, the main attention is given to controlling the metal vapour flows: through energy state of the condensing particles, their molecular composition, intensity, spatial distribution of the flow, etc. It is known that the widely accepted open-type evaporators, including quasi-closed ones, are characterized by instability of the directivity diagram of the vapour flow in time, even at constant temperature. Radiation load on the film growth surface from these sources is sometimes comparable to the energy of vapour flow condensation. Therefore, when they are used, it is quite difficult to produce reproducible film structures with controllable parameters. Particular difficulties arise at high evaporation rates, when micro-drops are usually present in the vapour flow.
Authors and Affiliations
I. N. GRECHANYUK, N. I. GRECHANYUK, G. CROITORU
Keywords
Related Articles
- EP ID EP659447
- DOI -
- Views 66
- Downloads 0
The Evolution of the Characteristics of Mechanical Resistance for the Nitro-Carburrized Treated Steel, after Thermo-Magnetic Treatment
The aim of the research was to study the evolution of the characteristics of mechanical resistance for one type of steel. The material was subjected to the thermo-chemical (nitro-carburized treatment in plasma) treatment...
Dioxins and Furans as Pollutant Emissions From Integrated Steel Works
In the metallurgical industry are several sources for pollutant emissions but the main source is the sintering process. In this paper are analyzed the generation process of persistent organic pollutant emissions (dioxins...
The Influence of Different Coatings on the Graphite Degeneration in the Superficial Layer of the Iron Castings
The main objective of this experimenal reserch is to investigate new possibilities for reducing the graphite degeneration phenomenon in the superficial layer of iron castings. For the experiment, a spheroidal graphite ca...
Setting the Optimum Angle of Solar Collectors Settlement
The performance of any solar energy system depends very much on the availability of solar radiation and the orientation of solar collectors. Solar collectors need to be inclined at the optimum angle to maximize the recei...
Nanostructured SiC-Ni Composite Coatings Obtained By Electrodeposition – A Tribocorrosion Study
The tribocorrosion properties of SiC (20nm) - Ni nanostructured coatings have been studied in pin on disc tribocorrosimeter connected with an electrochemical cell. The objectives of our study in principal is to fully und...