The Monitoring of the Technological Equipments by the Technological Process Specific Parameter

Journal Title: Romanian Journal of Acoustics and Vibration - Year 2009, Vol 6, Issue 2

Abstract

In order to establish the existence of the nonlinear character of the viscous-elastic dynamic isolation systems, practically, it is achieved by underlining the functional parameters variation that characterizes the dynamic operation behaviour of technological equipment. Thus, the functional state of the dynamic action machines and equipments is intermittent, periodical or continuously supervised until the controlled parameters modification requires the system’s repairing or stopping.

Authors and Affiliations

Adrian Leopa

Keywords

Related Articles

Influence of Damping Over the Rudder Control System of an Aircraft

The control system of the rudder of an aircraft can be modeled in a first order approximation as a system of rigid bodies that transmits instantaneously the desired motion to the movable part of the vertical tail. Howeve...

Analysis of Dynamic Response of the Human Body as a System With Several Degrees of Freedom From External Harmonic Perturbations

The modal analysis enables the evaluation of a certain structure`s behaviour based on the identification of the resonances or of the feed-back modes. It can be a method through which the modal parameters of the human str...

Researches Regarding the Effect of Nitinol Vibration Damper Applied to Infrastructures

Many of the performed researches all around the world aim to develop advanced technologies in order to enhance the performances of the infrastructure systems, different from the actual ones, fact which involves multidisc...

On the Vibrations with Seismic Excitation of the Rigid Elastically Hanged

Consider the rigid solid elastically hanged with large arrows to balance. Rigid matrix is established, which in this case depends on the values of the arrows to balance. In the case of seismic excitation (through basis)...

Experimental Analysis on the Influence of Supports in Performing Pipes Inspection Using Longitudinal Guided Waves

In the last decades, have been investigated guided waves in pipes, due mainly to their capacity of traveling long distances without substantial attenuation. The long range propagation is however limited, among other caus...

Download PDF file
  • EP ID EP124180
  • DOI -
  • Views 70
  • Downloads 0

How To Cite

Adrian Leopa (2009). The Monitoring of the Technological Equipments by the Technological Process Specific Parameter. Romanian Journal of Acoustics and Vibration, 6(2), 75-79. https://europub.co.uk./articles/-A-124180