The Numerical Simulation and Evaluation of Aircraft Engine Axial Flow Turbine using Numerical Techniques
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
This research aims to improve the efficiency of an axial flow turbine by improving the boundary conditions. In the baseline paper, Sherwood number, Nusselts number for a given flow were determined. The pressure ratio was not considered in the paper. Research has been done to improve the values by considering the pressure difference which was neglected in the base line paper. Axial flow turbines expand the flow passing through it. Losses like tip losses, efficiency losses and loss on blades due to heat are high and needs to be looked after. A comprehensive literature study was carried out for the better understanding of axial flow turbines, recent developments and to analyze the control of loses.
Authors and Affiliations
Bhavana G N S, S Suraj Singh, Srinivas .
Keywords
Related Articles
- EP ID EP656727
- DOI 10.24247/ijmperdaug2019101
- Views 98
- Downloads 0
The Optimization Techniques used in Solar Dryers: A Review
The energy from the sun is the most important source comprising renewable energy available on earth. The utilization of solar radiation for fruitful results are done in almost all the sectors such as industries, automobi...
The Experimental Studies of Heat Transfer and Friction Factor in a Roughened Solar Air Heater using Arc Rib Geometries
Solar air heater utilizes rib roughness to enhance heat transfer. Experimental investigation has been conducted to study heat transfer and efficiency improvement in solar air heater using the arc rib roughness. Rib rough...
Mathematical Modelling to Predict the Residual Stresses Induced in Milling Process
Residual stresses prediction has been challenge over the years. Many models have been developed in order to predict the residual stresses. Research has been taking place in this field since many decades. Numerical, exper...
Addressing Nox – Smoke Trade off in a Direction Injection Diesel Engine With Fuel Blends of Diethyl Ether and Diesel
In this research work, an experimental investigation was carried out to study the combustion, performance and emission characteristics of a single cylinder water cooled diesel engine, when fueled with blends of diethyl e...
A Study on AL2O3 – H2O Nano Fluid in the Presence of Constant Heat Source
MHD stream of a nanofluid Al2O3 past an oscillatory moving vertical porous semi-unending level surface with consistent heat source in a rotating frame of reference is analyzed. The arrangements of the boundary layer cond...