The Performance Enhancement of Axial Flow Turbine Using Numerical Technique
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
This paper aims to study the performance enhancement of subsonic axial flow turbine using numerical technique. R123 Organic Rankine Cycle (ORC) with high density is considered as the working fluid. A single stage axial flow turbine consisting of stator and rotor is used to carry out the analysis. The numerical analysis is carried out using ANSYS R18.1 version. The parameters considered to design the turbine geometry are tip diameter, hub diameter, blade height, half wedge angle of leading and trailing edge and number of blades of the stator and rotor. The design and study of axial flow turbine is mainly focused for engineers and technical researchers working in the field of ORC and engine design. Grid independence test performed with different mesh size to keep the computational economy intact. The experimental results are later compared with the theoretical calculation for verification.
Authors and Affiliations
Revathi Ramakrishnan, Srinivas. G
Keywords
Related Articles
- EP ID EP656592
- DOI 10.24247/ijmperdaug201995
- Views 98
- Downloads 0
Parametric Analysis and Effect of Tool on FSW Joint of 6082 Al Alloy by Taguchi Method
The Friction-stir processing is an emerging technology of plastic deformation that is based on friction stir welding (FSW). In friction stir welding, in order to get a defect free processed zone, the tool is considered t...
Defects of Communication Pipes from Plastic in Modern Civil Engineering
Plastic is an important material that is used in civil engineering. Communication pipes - one of the directions of use of plastic. The external environment affects the quality of the use of plastic pipes. Therefore it is...
A Computational Fluid Dynamic Analysis of Thermostat Valve (Using CMM and Making Prototype Through RPT)
Technical method for computer-aided reverse engineering, illustrated by a real working component of an aluminum-alloy thermostat valve from a MARUTHI ALTO vehicle. In this work involved reconstruction of component dimens...
Comparing the Effect of Heat Treatment and Plasma-Nitriding on Corrosion Resistance of Ni-B-CNT Electroless Coating with Different CNT Concentration on Aisi 4340 Steel
The aims of the work to study the resistance of corrosion and the hardness of plasma-nitrating and heat treatment of coatings with electroless Ni-B-CNT. Various concentration of CNT range, (0, 0.35 and 0.7)g/L in Ni-B-CN...
The Implementation of Tourism Demand Forecasting using Seasonal Arima fo the Investment Analysis of Floating Aquaculture
In order to improve the prosperity of coastal communities, the Ministry of Maritime Affairs and Fisheries has apropos strategy by building and revitalizing the aquaculture floating structures as the facilities for fish...