The Performance Evaluation and Emission Study of Compression Ignition Engine Operating with Blends of Animal Fat and Palm Oil Based Biodiesels
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Depletion of origin and anguish of health issues due to emissions by petroleum discharge triggered to take necessary steps to avoid adverse effects on forthcoming generation. In view of this tremendous work is being done to diminish dependence on fossil fuels by biodiesel which are ecofriendly. In this research work an investigation of biodiesel blends with diesel at different ratios will be done. Blends of pig fat biodiesel and palm biodiesel are prepared with different proportions of diesel. The composition abbreviated as APD with prefixing different percentage which indicates the quantity of biodiesel. From results recorded, it has noticed that 20% APD can be directly used without any modification in the engine. Performance results and emission results are acceptable for 20% blend which is in range with diesel. HC and CO emissions are less for all blends but CO2 and NOx emissions increases with blend ratios. 20% APD sample emission data is well compromised with diesel at all loads. Hence it can be said that 20% APD can be a potential sample that can be used directly in engine without modification.
Authors and Affiliations
Shaik Khadhar Basha, Satish kumar, Nitin D. Kamitkar
Keywords
Related Articles
- EP ID EP655370
- DOI 10.24247/ ijmperdaug201921
- Views 99
- Downloads 0
Microstructure and Mechanical Properties of Hot Extruded Mg-3zn-1cu-0.7mn Alloy Produced by Powder Metallurgy
A novel alloy, Mg-3Zn-1Cu-0.7Mn is fabricated using blend-press-sinter powder metallurgy technique, and the microstructural and mechanical properties of the alloy have been analyzed. Also, the effect of the stress-reliev...
Aero-Structural Optimization of Aircraft Wing by Finite Element Method
New and innovative designs must be explored to meet the aircraft requirements lower weight and more cost effective structure for future airplanes. For these reasons, present study aims to deals with the structural analys...
Performance Evaluation of Diesel Engine Using Biodiesel Fuel Derived from Waste Cooking Refined Soyabean Oil
Brazil is using bio-diesel as an alternate fuel to run cars. Rapid growth of bio-fuels all around the world is mainly due to energy crisis and ecological concerns, and in this dynamic market mechanisms, lot of efforts ar...
Improving Creativity and Innovation Through Human Resource Management Practices: Integration of Social and Componential Approach
The process of generating new ideas and its application has become the foundation for achieving competitive advantage among firms, which has propelled many organizations to actively seek for novel ways in their operation...
Effect of T6 Heat Treatment on Hardness Wear and Fatigue Behaviour of Nickel Coated Carbon Fiber Reinforced Al-7079 MMC
Aluminum metal matrix composites are preferred over other conventional materials in the field of aerospace, marine and automotive applications due to their improved tribological and mechanical properties and increased st...