The Performance of Alumina Mixed Coconut Oil in Turning of SS304 Alloy
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
In the present scenario there is avast stipulate for environmental friendly cutting fluids because of severe rule enforced on usage of synthetic cutting fluids prepared by organic oils which creates perilous to the health of machine operators and environment. Ensuing towards this, better and safe cutting fluids are required to overcome these problems. In this connection, compare to present cutting fluids organic cutting fluids give a better results and also easily available. In these organic cutting fluids coconut oil is the best one. Coconut oil issafe to use, decomposable and ecologically friendly cutting fluid. Moreover, the performance of coconut based cutting fluids can be improved by addition of micro or nano particles. This present study emphasis on performance and the usage of the nano alumina with coconut oil in turning of stainless steel 304 alloy with minimum quantity of lubrication. L16 design of experiments done with different speeds, feeds, depth of cuts and percentages of alumina varied cutting fluids are the input process variables. Surface finish and material removal rate has been calculated in 16 machining conditions. Based on the results this study clearly reveals thatspeed rate and alumina percentage in coconut oil are the major parameters that have considerable effect on the surface finish. The depths of cut and alumina percentage in coconut oil arethe main parameters that affect the material removal rate.
Authors and Affiliations
Javvadi Eswara Manikanta, K Durga Naga Bhushanam, N. Vasu Devarao, B. S. S. Phani Shankar, Narise Venkatesh
Keywords
Related Articles
- EP ID EP656889
- DOI 10.24247/ijmperdaug2019115
- Views 107
- Downloads 0
An Indian Earth Station Visibility Aspects for Near Real-Time Tsunami Monitoring
Research on the possibility of detecting a Tsunami event in the Bay of Bengal is being conducted at Jain University, Bangalore, considering the possibility of microwave altimeter configured on a number of small satellite...
Parametric Optimisation of Wire EDM of Heat Treated EN8 Steel Using Taguchi Technique
The present research work optimizse the parameters of wire electrical discharge machining (wire EDM) of such as pulse on, pulse off, current and voltage using the Taguchi optimizsation technique in machining of heat trea...
Performance Studies on diesel Engine Stabilized with TBC and Glycine Max Blended Oil
These days, thermal barrier coatings are gaining remarkable attention among researches owing to their wide applications and impact on several critical performance parameters of an engine. This throws light on the experim...
EXPERIMENTAL EVALUATION OF PERFORMANCE OF AIR-CONDITIONING COMPRESSOR DUE TO AL2O3 NANOPARTICLES IN LUBRICATING OIL
Nanoparticles are being widely used in recent years, due to their advantages. Addition of nanoparticles leads to significant change in thermal properties of a fluid. A new engineering medium, called nanofluid attracted a...
Mass Optimization for Structural Members in an Aircraft Wing Using Numerical Techniques
In an Aerospace industry, reduction of mass is having a greater significance. In this paper the main objective is to reduce the mass of the structure and without getting effected to system parameters like deflections and...