THE POTENTIALS OF SOLAR ENERGY IN THE REPUBLIC OF SERBIA : CURRENT SITUATION, POSSIBILITIES AND BARRIERS
Journal Title: Applied Engineering Letters - Year 2018, Vol 3, Issue 3
Abstract
Although the potential of solar energy in the Republic of Serbia is up to 30% higher than in the countries of the European Union that lead to the implementation of these technologies, the Republic of Serbia is ranked among the countries with the lowest production in the region with the production of 10 MV solar PV capacities. The aim of the paper was to present the current balanced capacities, related to solar PV energy, in the Republic of Serbia and countries in the region. In order to present better the material and conclude why the results in the Republic of Serbia are not better, in the paper are analyzes the possibilities for installing such capacities as well as the barriers that need to be eliminated.
Authors and Affiliations
Aleksandar Ašonja, Veljko Vuković
Keywords
Related Articles
- EP ID EP428066
- DOI 10.18485/aeletters.2018.3.3.2
- Views 120
- Downloads 0
ANALYSIS OF ROUGHNESS PARAMETERS OF LATERAL BACK SURFACES OF MODEL HOB MILLING TOOLS DURING CYLINDRICAL GEAR CUTTING
The problem of generating is analyzed in science and practice in various ways by identifying it once as an element of the machine, and the second time as a part of production, that is, a final product. The nature of the...
SYSTEM IDENTIFICATION BASED INVERSE KINEMATICS ANALYSIS AND CONTROL OF A MULTI‐DOF ROAD SIMULATOR
This paper presents, system identification based inverse kinematics analysis and control of a multi‐DOF road simulator. Multi‐DOF road simulators are special devices which are widely used to perform road profiles to a ve...
VIBRATION ANALYSIS AND REPAIR PROCESS FOR THE VENTILATION SYSTEM FOR SMOKE DRAIN IN THE THERMAL POWER PLANT
Vibrations are common phenomenon in the rotating machinery, which could carry important information about condition of the rotating machinery. All specific failures in rotating machinery have their own characteristics of...
COMPARISON OF HEAT EXCHANGERS ACCORDING TO THE SHAPE OF RIBS
In this paper the lamella heat exchangers were presented. They are used for water and air as operating mediums, and can be differentiated by the shape of the ribs. The one has sinuous type of ribs, while the other one ...
MECHANICAL, MICROSTRUCTURE AND WEAR BEHAVIOUR OF LM25/SiC/MICA METAL MATRIX COMPOSITE FABRICATED BY SQUEEZE CASTING TECHNIQUE
Metal matrix composite (MMC) has a unique class of light weight advanced engineered materials which are developed to give high strength, improved hardness, tensile strength, good elongation and good resistance to wear an...