THE PROPERTIES OF THERMOSENSITIVE GYNECOLOGICAL POWDERS CONTAINING LACTIC ACID COMPLEXED WITH CHITOSAN
Journal Title: Progress on Chemistry and Application of Chitin and its Derivatives - Year 2015, Vol 0, Issue
Abstract
The investigations showed that the addition of a 20%, 23% and 25% poloxamer 407 increases the adhesive properties of the investigated powders, but at the same time it increases their pH. The enrichment of the composition of the tested powders containing 5% glycerol and 5% 1,2-propylene glycol resulted in increased pH of the formulations. A modification of the composition of the tested powders containing 5% glycerol and 5% 1,2-propylene glycol has increased the range of the dynamic viscosity of formulations. The enrichment of the composition of the tested powders containing 5% hydroxypropylmethylcellulose resulted in increased the range of the dynamic viscosity and decreased pH of the formulations. Laboratory tests have shown that it is possible to obtain thermosensitive gels with high adhesion properties to vaginal mucous membrane.
Authors and Affiliations
Katarzyna Małolepsza-Jarmołowska
BEHAVIOUR OF TiO2/CHITOSAN DISPERSION AS A FUNCTION OF SOLUTION pH
This paper presents the physico-chemical characteristics of titanium dioxide/chitosan dispersion. The surface and electrostatic properties of TiO2 particles in the electrolyte solution (NaCl) and in the presence of a bio...
NEW HOMOGENEOUS BLENDS OF DIBUTYRYLCHITIN AND ALIPHATIC POLYESTERS
The results of physical modification of dibutyrylchitin (DBCH) for the purpose of improvement of its imperfect mechanical properties are presented. Thus, the novel blends of DBCH and biodegradable aliphatic copolymer der...
STRUCTURAL CHARACTERISTICS OF THERMOSENSITIVE CHITOSAN GLUTAMINATE HYDROGELS
Hydrogels that possess the ability of gelling in response to changes in the local environment, such as pH or temperature, have been examined extensively recently. In this paper the properties of thermosensitive chitosan...
Studies on the Dyeing of Chitin and Chitosan with pre-metallised Dyes at Neutral pH
Both 1:1 pre-metallised acid dyes and pre-coppered direct dyes, but not 1:2 pre-metallised acid dyes, have been shown to readily dye chitin and chitosan from neutral dyebaths. With the 1:1 pre-metallised acid dyes the ad...
ADVANCED CELLULOSIC MATERIALS
Aim of the work was to prepare a method of producing chitosan and chitosan-alginate nanoparticles designed for the modification of textile cellulosic products in hygiene and medical application. Spectrophotometry was use...