The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins
Journal Title: Electronic Physician - Year 2017, Vol 9, Issue 7
Abstract
BACKGROUND: The utilization of computer-assisted designing and computer-assisted milling CAD\CAM resins in the fabrication of removable prostheses is a modern-day concept that offers many advantages over the use of the traditional polymethylmethacrylate (PMMA). AIM: This study instigated some of the mechanical properties of CAD\CAM denture base resin including the amount of residual monomer. METHODS: This study was conducted at the Faculty of Dentistry, King Abdulaziz University from October 2016 to February 2017. A total of seventy rectangular specimens were fabricated (group A: 35 heat-cured PMMA and group B: 35 CAD/CAM pre-polymerized acrylic resin blocks). The flexural strength and surface hardness were tested while the residual monomer content at baseline, two-day and seven-day intervals was estimated using gas chromatography (GC). Means and standard deviations were determined for each group as well as independent-samples t-test and ANOVA with repeated measures for comparison between the groups and subgroups of varying time intervals. RESULTS: Heat cured PMMA (A), displayed higher flexural strength and low value flexural modulus compared to CAD/CAM acrylic resin denture base material (B). Student t-test indicated highly significant differences (p<0.001) of the flexural strength (t=37.911) and flexural modulus (t=88.559). The surface hardness of group (B) was significantly higher compared to group (A) as indicated by the t-test (t=20.430). Higher release of the monomer content was detected by GC in group (A) at different time intervals with a statistically significant difference (p<0.001) in residual monomer content. CONCLUSION: CAD/CAM resin may be considered suitable for use in the construction of denture bases
Authors and Affiliations
Al-Dharrab Ayman
Keywords
Related Articles
- EP ID EP323544
- DOI 10.19082/4766
- Views 106
- Downloads 0
Moral competency: meta-competence of nursing care
INTRODUCTION: To follow the progress of technology and increasing domain of nurses' duties, ethical challenges can be observed more than ever. Therefore, the growing and dynamic system of nursing requires nurses with pro...
Exploring the youth experience about sense of social security: a qualitative study
BACKGROUND: Undoubtedly, one of the vital needs of man is security. Determinants and related factors to sense of social security is one of the most important research priorities, especially in adolescents and young peopl...
Customers’ satisfaction about prehospital emergency medical services in Lorestan, Iran
INTRODUCTION: Patient's satisfaction with health care in ambulance services is an important quality indicator and a helpful tool for managers of prehospital emergency services. This study aimed to measure patient satisfa...
The predictors of earthquake preparedness in Tehran households
BACKGROUND: The high risk of an earthquake happening and the harmful consequences that it leaves, besides the unsuccessful policies for preparing the community for mitigation, suggested that social factors should be cons...
Does Hypothyroidism Affect Post-Operative Outcome of Patients Undergoing Carpal Tunnel Release?
INTRODUCTION: Risk factors associated with Carpal Tunnel Syndrome include repetitive use of hand and wrist, advanced age, obesity, pregnancy, diabetes mellitus and thyroid disease. Decompression of the median nerve is th...