The Site Selection of Wind Energy Plants Using the MOORA Method
Journal Title: International Journal of Pioneering Technology and Engineering - Year 2022, Vol 1, Issue 01
Abstract
An important part of Turkey's energy needs is met with fossil fuel energy resources. The lack of fossil fuels to be sustainable and lead to pollution of the renewable energy resources, wind energy has led to be a very important energy resource for Turkey. Turkey Wind energy potential of Turkey is high. The initial installation costs of wind energy plants are high. For this reason, it is very important to select the wind energy plant installation sites correctly to ensure high efficiency from the plants. There are many criteria that affect the decision-making process in selecting an installation site of a wind energy plant. Therefore, installation site selection of a wind energy plant is a complex decision-making process. In this study, considering the wind speeds over the wind energy potential map, three plant sites are determined in the southeast (RES_1), north (RES_2) and southwest (RES_3) of Amasya. MOORA method (Multi-Objective Optimization on basis of Ratio Analysis), which is one of the Multi-Criteria Decision Making methods, has been used in the selection of the most appropriate installation site. Determined criteria values and benchmark weights are used in MOORA method. Using the MOORA method, the plant installation sites are ranked. After that, the most suitable wind energy plant installation site (RES_2) is determined for Amasya.
Authors and Affiliations
Engin Ufuk Ergul,Mustafa Genc,
Keywords
Related Articles
- EP ID EP704835
- DOI https://doi.org/10.56158/jpte.2022.18.1.01
- Views 60
- Downloads 1
On the Measurement of Nakazima Testing Based Out-of-Plane Forming Limit Curves using 2D Digital Image Correlation
The strain compensation method for measuring in-plane forming limit curves (FLCs) using 2D digital image correlation developed previously [A method of measuring in-plane forming limit curves using 2D Digital Image Correl...
Differentiation in Differentiation Method and Neural Network to Investigate Different Criteria of Economic Productivity
Economic productivity is one of the most important concepts in economics. Increasing economic productivity will boost a society. This study intends to compare the impact of different criteria on the economic productivity...
Air quality assessment for Kunooz Gabbro quarry in Oman: assessment of PM10
This study provided an air quality assessment for Kunooz Gabbro Quarry in Al Jaffnain, Al-Seeb, Oman and focused mainly on emitted particulate matter 10 micrometers or less in diameter (PM10) from different sources insid...
Analysis of Working Postures in Rubber Manufacturing Industry by using OWAS and RULA Methods
The basic conditions of working in a healthy and safe workplace are to design the job in accordance with the anthropometric measurements, body strength and personal characteristics of the person, to ensure that the mater...
Creation and comparison of three-dimensional models of a mechanical part in agriculture field by forward and reverse engineering
In the last 30 years, we often hear about the computer aided design method with the help of the developments in adapting the innovations in the field of computer to the field of design. This method is divided into two su...