The stapling of material layers process capability study by the production of the product "MULTIAXIAL"
Journal Title: Production Engineering Archives - Year 2015, Vol 0, Issue 1
Abstract
Ensuring the process capability currently means the warranty, that produced products will be in accordance with requirements - from the company or customer´s side. This study focuses on the statistics control of stapling of material layers process capability by production of the product "multiaxial". The stapling of material layers process is evaluated by control charts, specifically by control charts for average and range(X, R). As the results show, on the basis of the diagram for average and range we we are able to say that the process is under the statistical control. We had also finished the reguest for capability of process, where the indexes of capability process Cp and Cpk are higher than the determinated value by 1,33 points. The obtained values are: Cp = 1,68 a Cpk = 1,55.
Authors and Affiliations
Katarína Lestyánszka Škůrková
Keywords
Related Articles
- EP ID EP165883
- DOI -
- Views 63
- Downloads 0
FACET5 IN THE RECRUITMENT AND MANAGING PROCESS AS REGARDS PRODUCTION PERSONNEL - CASE STUDY
The hereby article describes the study of two cases, the recruitment process as regards a newly created position and the decision concerning promotion to a managerial position. In both cases tool called Facet5 (used for...
The issue of wooden and concrete railway sleepers utilization
The high degree of degradation of the surface of the existing rail road causes the intensification of the modernization works. Due to modernization of the railway track, damaged parts of trackway are replaced with new on...
Cost of product functions using analysis of value
The value of use is a specific notion but of a great generality that makes the product be regarded as a complex system that transforms itself in time, thus undergoing evolution. Therefore, the product is important not in...
Analysis of impurity spaces as a percentage volume of non-metallic inclusions
The parameters of high-grade steel are influenced by a combination of factors, including chemical composition and production technology. The impurity content is also a key determinant of the quality of high-grade steel....
IRREGULAR OPERATION OF AUTONOMOUS VEHICLES
Today, with the spread of autonomous functions in vehicles, the role accountability for causing acci-dents is emphasized. Self-guided functions work in certain traffic situations, but accidents happen, and, therefore, th...