The structure of void space of complex structured Bashkir carbonate reservoir rocks from the Opishnianske deposit of the DDD
Journal Title: Геофизический журнал - Year 2019, Vol 41, Issue 3
Abstract
The analysis of materials of well-logging of the wells of the Opishnanske deposit of the DDD was conducted for the purpose of the determination of their reservoir promise. The void structure of Bashkir carbonate reservoir rocks (productive horizon B-10) of 11 wells of the Opishnanske deposit of the DDD was defined for the first time in this article. The quantitative assessment of porosity types of reservoir rocks was done using a method, developed at the Taras Shevchenko University of Kyiv, which basis is a complex of well-logging methods that includes radioactivity and acoustic logging. Using well-logging methods, the potential reservoir rocks were distinguished, the forms of voids were calculated, and the contribution of different void types (intergranular, fracture, vuggy, secondary porosity) in the absolute porosity was assigned. As a result of the study, it was found that the fracture voids are present to a large extent only in layers, presented by water-saturated reservoir rocks, whose fracture porosity ratio acquire values from 0,2 % to 1,5 %. The fracture type of voids is present in layers with gas-saturated reservoirs in rocks with considerably lower concentrations (from 0,05 to 0,29 %). The vugggy voids are distinguished in almost a majority of layers, a vuggy porosity ratios in them reach 9,8 %. Based on the determination of type and concentration of voids in car-bonate reservoir rocks, the promise and predictive discharges of water and gas were determined by authors using a calculated parameter of the unit surface area of voids. The authors have identified the predictive yields higher than 1tonn per day in all wa-ter-saturated reservoir layers, and the highest were in two layers with daily flowrates of 307 and 3200 t/d in the well intervals of: 2816,4—2820 m (№ 12) and 2864—2870,4 m (№ 114). The highest predictive discharge of gas, that is 352 thousand cubic meters per day, is determined in a well 127 (the interval of 2773,8—2775,5 m). The gas discharges in three intervals of the well 127 are calculated within 140 thousand cubic meters per day (2762,4—2764,7, 2788—2790, 2822,8—2824,4 m). Increased discharges correlate with the presence of fracture and increased secondary porosity.
Authors and Affiliations
S. Vyzhva, I. Bezrodna, O. Tkachenko
Lithospheric structure based on integrated analysis of geological-geophysical data along the DOBREfraction’99/DOBRE-2 profile (the East European Platform —the East Black Sea Basin)
The continuous DOBREfraction’99/DOBRE-2 WARR and CDP profile of 775 km length with about 100 km overlap was acquired by an international team from Ukraine, Poland, Denmark, USA, Netherlands, Germany, Great Britain and No...
Formation geological depth image according to refraction and reflection marine seismic data
The possibility of forming of the geological depth image from marine seismic data observed with the method of reflected waves by multiple overlaps and the refracted method by deep seismic sounding was investigated. The d...
Conditions of ferruginous-cherty formations origin (Middle-Dnieper mega-block)
The basic idea of existing hypotheses of ferruginous-cherty formations origin is an opinion that the form of iron presence depends on conditions at the depth of sediments accumulation. It has been shown in this paper wit...
Probabilistic seismic hazard analysis of Moldova and adjacent territories
A new approach to seismic hazard assessment is proposed. It means that in a certain location of the Earth’s surface during the time t will occurs a certain number n of shakes and m of them with intensity Ik. The algorith...
Models of out-of-line deformation in structural analysis of folding of the Ukrainian Carpathians
Structural analysis and reconstruction of folding of the Ukrainian (flysh) Carpathians have been executed according to materials (cross-sections) of medium-scale geological survey. Methodic development has been used with...