THE USE OF FACTORIAL DESIGN FOR ANALYSIS OF MERCURY REMOVAL EFFICIENCY USING PALM OIL FUEL ASH

Journal Title: Water Conservation and Management - Year 2018, Vol 2, Issue 1

Abstract

A two-level half fractional factorial design was employed to evaluate the factors that have the greatest effect on the mercury removal efficiency. Several factors can influence the mercury removal using palm oil fuel ash (POFA). The aim of this study was to examine the main and interaction effects on mercury removal efficiency using POFA. The parameters which affect the mercury removal are pH (2 - 6), contact time (1 hr - 4 hr), initial concentration of the Hg2+ solution (1 mg/L – 5 mg/L), adsorbent dosages (0.10 g – 0.25 g) and agitation speed (100 rpm – 200 rpm) were investigated. Half factorial design using Response Surface Methodology (RSM) was used to determine the significant contribution of the above factors towards mercury removal efficiency. From the statistical analysis, the main factor of contact time and the interaction between adsorbent dosage and initial concentration of the Hg2+ resulted in the strongest effect on mercury removal. However, the interaction between agitation speed and pH was the least influencing factors. Based on the predicted and the experimental results presented, the experimental values were in good agreement with the predicted values proposed by the model with an error less than 10 % and proved to be an adequate model. The result indicated that fractional factorial design (FFD) was useful to improve the mercury removal efficiency by considering all the interactions of variables involved. In summary, this demonstrated that POFA could be potential as low-cost adsorbent for the removal of mercury.

Authors and Affiliations

Imla Syafiqah, Hafizuddin Wan Yussof

Keywords

Related Articles

FISH DIVERSITY AND WATER CHARACTERISTICS IN THE REJU KHAL RIVER ESTUARY, BANGLADESH

Hydrobiological characteristics determine the health of an aquatic ecosystem. Reju Khal estuary on the subtropical coasts is among the major estuarine system in Bangladesh. Monitoring the water characteristics and fish d...

TIMECOURSE STUDY OF COAGULATION-FLOCCULATION PROCESS USING ALUMINUM SULFATE

In conformity with drinking water standards, water purification units must remove colloid impurities in water which shelters microorganisms such as bacteria and viruses, and natural organic matter (NOM) using the sequenc...

THE IMPACT OF RAINFALL VARIATIONS ON FLASH FLOODING IN HAOR AREAS IN BANGLADESH

The north-eastern part of Bangladesh is famous for rice production and fishing. A lot of bawl shaped depressed areas are located in this region which is locally called as haor area. Among seven haor districts Sunamganj h...

WATER MANAGEMENT OF THE MEKONG RIVER

In the coming decades, river pollution is a serious problem not only in Asia but around the world. As the river flows through many countries, the development and water quality of the Mekong River is related directly to s...

PHOTOCATALYTIC DEGRADATION OF FENITROTHION IN WATER WITH TiO2 UNDER SOLAR IRRADIATION

Fenitrothion is widely used as herbicide with strong estrogenic activity, and it can lead to abnormalities of the thyroid gland and can give mutations. Hence, their degradation treatment is necessary for the environment....

Download PDF file
  • EP ID EP282260
  • DOI 10.26480/wcm.01.2018.10.12
  • Views 97
  • Downloads 0

How To Cite

Imla Syafiqah, Hafizuddin Wan Yussof (2018). THE USE OF FACTORIAL DESIGN FOR ANALYSIS OF MERCURY REMOVAL EFFICIENCY USING PALM OIL FUEL ASH. Water Conservation and Management, 2(1), 10-12. https://europub.co.uk./articles/-A-282260