The Use of Optical Methods in the Analysis of the Areas with Stress Concentration
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 2
Abstract
Anchoring parts of technical systems are often damaged due to the heavy forces acting on these systems during their operation. For that reason, various modifications are suggested and created on the anchoring screws, which should help to reduce the mechanical stress values in a place of the first load-bearing thread of a female screw. For the determination of stress fields on the surface of a plane model of a threaded joint, two non-contact optical methods were used – conventional transmission photoelasticimetry and modern digital image correlation.
Authors and Affiliations
Miroslav Pástor, Peter Frankovský, Martin Hagara and Pavol Lengvarský
Keywords
Related Articles
- EP ID EP43940
- DOI https://doi.org/10.2478/scjme-2018-0018
- Views 174
- Downloads 0
The Investigation of the Cavitation Phenomenon in the Laval Nozzle with Full and Partial Surface Wetting
The article deals with the cavitation phenomenon affected by full and partial wetting of the wall. For the numerical computation of flow in the Laval nozzle the Schnerr-Sauer cavitation model was tested and was used fo...
Fem Simulation of Thermal Cycles During Laser Welding of Aluminium
The submitted paper deals with the simulation of thermal cycles during laser welding of aluminum sheets using Finite Element Method (FEM). After the design and creation of the simulation model, the simulation results w...
Process Parameters Optimization for Producing AA6061/TiB2 Composites by Friction Stir Processing
Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to fabricate the aluminium alloy matrix composites. An attempt is ma...
Neural Networks - A Way to Increase the Fuel Efficiency of Vehicles
This paper deals with the possibility of creating a vehicle model using a hierarchy of neural networks. Based on this model, it is possible to build an optimization cycle that looks for parameters which are influencing...
Effect of Additives on Static Settled Concentration, pH and Viscosity of Bottom Ash-Water Suspension
In the present work, static settled concentration, pH and viscosity of bottom ash is studied with addition of additive. Sodium sulfate is used as an additive with proportion of 0.2, 0.4 and 0.6% (by weight). The solid...