The way the mistery of the Mattei’s case was solved
Journal Title: Frattura ed Integrità Strutturale - Year 2010, Vol 4, Issue 14
Abstract
Enrico Mattei, the President of the Italian oil conglomerate, ENI, was about to land in Milan Linate Airport on October 27, 1962 when his airplane crashed on the ground due to a then unexplained accident. The investigation, reopened more than 30 years later, implied complete re-examining of the theories on macroscopic and lattice deformations under high velocity waves emanating from a small charge explosion. Various macro- and micro-structural changes are induced by an explosion and by the resulting shear stresses in metals exposed to it. At the microstructural level multiple slip bands or mechanical twins, induced from the pressure wave caused by an explosion, can be observed. The occurrence of either ones depend on the type of metal, the pressure and the strain rate. The temperature wave may also cause surface alterations. Different situations regarding stainless steels, aluminium, copper and gold alloys are analysed. Calculations to evaluate which deformation mechanism is eligible for different FCC metals and alloys are reported. Results of field explosion experiments are incorporated into the evaluation of microstructural signs possibly induced on metal targets by an unknown explosive event. Revisited theories were applied to the Mattei forensic case, reaching the conclusion that the aircraft had fallen following an on board small charge explosion.
Authors and Affiliations
Donato Firrao, Graziano Ubertalli, Paolo Matteis, Chiara Pozzi
Keywords
Related Articles
- EP ID EP103013
- DOI 10.3221/IGF-ESIS.14.09
- Views 81
- Downloads 0
Multiaxial fatigue strength of severely notched titanium grade 5 alloy
The multiaxial fatigue strength of severely notched titanium grade 5 alloy (Ti-6Al-4V) is investigated. Experimental tests under combined tension and torsion loading, both in-phase and out-of-phase, have been car...
Interpreting experimental fracture toughness results of quasi-brittle natural materials through multi-parameter approaches
Natural stones like marbles are often employed as façade panels to externally cover buildings. These natural materials tend to exhibit a quasi-brittle nonlinear fracture behaviour which, conversely to concrete co...
Application of thermoelastic stress analysis for the experimental evaluation of the effective stress intensity factor
In recent years, the advent of staring array detectors has made Thermoelastic Stress Analysis (TSA) a technique with considerable potential for fatigue and fracture mechanics applications. The technique is non-cont...
Mechanical behaviour and durability of high volume fly ash cementitious composites
The purpose of this research is to separate different morphological particles of ASTM class F fly ash, and study their effect on mechanical behaviour and durability of high volume cementitious mixtures. In this res...
Multiaxial fatigue of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) for automotive safety components under constant and variable amplitude loading
Regarding the fatigue behaviour of EN AC-42000 T6 (A 356 T6), which is the most frequently used cast aluminium alloy for automotive safety components, especially under non-proportional constant and variable n...