Theoretical and experimental study of double-sided grinding process of round face ends by orientated wheels with calibrating sections
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 89, Issue 1
Abstract
The developed 3D model first determines the overall machining efficiency Qs of two round face ends processing, for example, cross-pieces, pushers, depending on the coordinate θb along the entire length of the contact line L. It is equal to the sum of the grinding performance of all parts located in the processing area on each of the wheels edges. For the first time a general methodology of theoretical and experimental research of specific and general: productivity, power and cutting forces on the left and right face ends of the part, the sum of which is equal to the total productivity on both ends, has been developed. The method of determining the connection of the current angular coordinate of the axis of the part with the required processing time is developed. While the part machining is carried out on the calibration section, the next part is not fed to the processing area, which eliminates the influence of the transition process on the accuracy of shape forming, and the efficiency improving is ensured by the fact that the next part enters the processing area immediately after the release of the part from the calibrating section.
Authors and Affiliations
Dmytro Kalchenko
Keywords
Related Articles
- EP ID EP289597
- DOI 10.33108/visnyk_tntu2018.01.100
- Views 57
- Downloads 0
Recommendations for designing cellular wall polyethylene pipes placed in the soil
Information about various Ukrainian and international national standards in the field of design and installation of polymer pipes with hollow walls is given. The strength of cellular wall polyethylene pipes placed in the...
Modular 3D modeling of ends bilateral grinding process by wheels with conical calibrating sections
The modular 3D model of the process of grinding the ends of circular rotating parts during processing and oriented noncircular grinding wheels with conical sections templating. On the basis of which created new ways of p...
The numerical anaysis of stressed state of multilayered coverings with defects on an rigid foundation
Multilayered coverings can be considered as thick plates resting on a rigid substrate. For research of stress-strain state (SSS) of multilayered plates on an rigid foundation the refined structural-continual model of mom...
Forced vibrations of piezoceramic cylindrical shells
This paper is devoted to the analysis of the forced vibrations problem for piezoceramic cylindrical shells in the form of short and high rings with radial polarization. Simultaneously a new simple technique for an experi...
The electrochemical method application of in-service degradation control of port cranes steels
Long-term service of marine port cranes causes a deterioration of mechanical properties of their structural materials, especially plasticity and brittle fracture resistance. Therefore it is important to control not only...