Theoretical and Practical Aspects Regarding Radiated Emission Testing in Semi-Anechoic Chambers
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
This paper presents some theoretical and practical aspects on measurements of radiated emission from a Portable computer. The used Standards are presented and discussed. The measurements were carried out in a Semi-Anechoic Chamber (SAC) in accordance with EN 55022 (CISPR 22) Standard. The test arrangement was in accordance with IEC 61000-4-3 Standard and the following equipment was included: reception antenna, signal generator and emission antenna. The measurements were made at a distance of 3 meters, according to the generic Standard IEC 61000-6-3. The radiated electromagnetic interference (EMI) was assessed in the frequency domain, for the frequency range of 30 MHz – 1 GHz, in compliance with CISPR 22 Standard. The test was performed to verify if the tested item (EUT) – in our case a Portable computer – is operating according to the radiated emission limits imposed by the product Standard of the class in which the equipment is framed: IEC 61000-6-1. Analyzing the values obtained for Quasi-peak during the test period, we noted that none of them exceeded the maximum allowed. The results were in satisfactory agreement with the limits imposed by CISPR 22 Standard, and have demonstrated that the equipment – in our case a Portable computer – works in optimal parameters, passing the radiated emission test.
Authors and Affiliations
Livia-Andreea Dina, Viorica Voicu, Petre-Marian Nicolae, Ionuţ Daniel Smărăndescu
Neuro-fuzzy DTC for an Electrical Drive System with Induction Motor. A SISO controller for the velocity loop
The paper presents some design aspects concerning the implementation of a neuro-fuzzy controller for the velocity loop of an electrical drive system with induction motor and a Direct Torque Control strategy. The approach...
Design of Wireless Electromagnetic Energy Transfer Systems
This paper presents a set of diagrams for wireless power transfer systems (WPTS) with applications in key domains such as: medical, electrical engineering, military, etc. Our research is based on original circuits workin...
Active Power Filter Study Using Dedicated Matlab GUI
This paper presents an understandable and friendly Matlab interface, which shows the active filtering role in a simple manner for the users. The created interface allows the active filtering system simulation, choo...
CALCULATION OF POWER TRANSFORMERS HEALTH INDEXES
In order to prevent possible defects of power transformers and to avoid losses which occur after taking them out of service, it is important to know the state of their insulation systems. For this purpose, health index i...
MODELLING OF ELECTROMECHANICAL CONVERTERS OF TRACTION USED ON ELECTRIC LOCOMOTIVES
The paper begins by presenting basic electrical diagrams of the main types of electric locomotives (with chopper and DC motors or with rectifiers and DC motors or with VVVF and induction motors IM or with self-controlled...