Theoretical study of dependence of screwing of drilling-pipe connector on thread-process cutting tool profile
Journal Title: Mining – Informatics, Automation and Electrical Engineering - Year 2019, Vol 537, Issue 1
Abstract
Screwing is one of the main parameters of the quality of a drill string tapered thread tool joint. It indicates the number of screwing operations that can be applied to this tool joint during drilling. Tool joints that have undergone rejection (determined by a specific criterion – the distance between the end faces of the pin and the box before they are start the screwing) are not permitted to screw. The value of this criterion is proportional to the working height of the threadprofile, which decreases during operation. In this article, it is offered to increase the initial value of the criterion of rejection due to the increase of the work height of the thread profile. This can be done without violating the standard but with the use of a modernized profile of the tool for thread turning. This profile makes it possible to increase the crest diameter of the thread and at the same time ensure sufficient tool life. Due to its usage, the resource of the tool joint can increase by 9–14.5%, while the cutter’s tool life and cost remain unchanged.
Authors and Affiliations
Vitalji Panchuk, Oleh Onysko, Tetiana Lukan, Iuliia Medvid
Keywords
Related Articles
- EP ID EP598282
- DOI 10.7494/miag.2019.1.537.7
- Views 92
- Downloads 0
Telematics in underground mining
Telematics denotes new telecommunication functions connected with the informatics domain. In this paper, these issues have been referred to selected telecommunication and informatics systems applied in Polish mining plan...
Significance of cutting process parameters as related to improving dynamic state of roadheader and minimizing power consumption
The process of mechanical excavation, especially that of hard rocks, is very dynamic. This results in heavy loads and vibrations in the cutting system of a roadheader, the drive units of the mechanism related to the exca...
Data transmission from electronic current transducers to a process bus in the IEC 61850 standard
The IEC 61850 standard is used more and more commonly now in the implementation of new distribution stations or modernization of the existing ones. One of the major aspects in proper functioning of such systems is the me...
Development of mine underground transportation with use of suspended monorails
The development of suspended monorails is presented, indicating their advantages and limitations in use. Attention is paid to the development of monorails with battery drives in recent years. Example solutions including...
Galvanic separation of analogue signals
The article deals with the issues of galvanic separation of analogue circuits and methods to perform it. The authors described capacitive, inductive and optical couplings, separation with the use of processing as well as...