Theoretical study of the effect of the layer thickness on the sensitivity of tapered fiber optic sensors
Journal Title: Applied Electromagnetics - Year 2023, Vol 11, Issue 1
Abstract
In this paper, a comprehensive study was performed to investigate the effect of the absorbent layer thickness on the tapered fiber sensor sensitivity, which leads to the highest sensitivity for the sensor. For this purpose, a staircase method was introduced to investigate the effect of layer thickness on the sensitivity of fiber optic sensors. According to the results obtained from the simulations performed using this method, it was found that the type of variation in the sensitivity of the tapered fiber optic sensor depends on the refractive index of the layer. To investigate the dependence of sensitivity on the layer thickness and refractive index of the layer, two different general cases have been considered. If the refractive index of the layer is smaller than the refractive index of the fiber, it can be seen that the sensitivity increases with increasing the layer thickness. On the other hand, when the refractive index of the layer is greater than the refractive index of the fiber, there are optimal points in the sensitivity plot versus the layer thickness, which demonstrate the highest sensitivities.
Authors and Affiliations
mohammad vahedi,ali riahi,
Keywords
Related Articles
- EP ID EP730690
- DOI -
- Views 55
- Downloads 0
Excitation and amplification of hybrid modes in circular-elliptic combined plasma waveguides including relativistic electron beam
The dispersion relation and the growth rate of the hybrid electromagnetic waves propagating in the two types of combined waveguides with complete conductor walls including isotropic cold plasma column that powered by rel...
Investigation of length reduction and radiation power enhancement of short-wavelength free electron laser
Free electron laser technology is one of the most suitable options to achieve high power, coherent radiation in the range of short wavelengths, especially XUV and X. One of the most important challenges in construction o...
Effect of strong uniform axial magnetic field on the TE and TM modes fields and injected electron dynamic in the plasma waveguide with Piet Hein cross section
In this paper,considering the effect of a strong uniformly axial magnetic field on the plasma dielectric tensor, electromagnetic fields and other results in a waveguide with a metal wall with a cross-section in the shape...
Investigation and fabrication of palladium-copper composite layer as an adsorbent layer of tapered fiber optic hydrogen gas sensor
In this research, the effect of adsorbent layer on the hydrogen gas sensing of tapered optical fiber sensors has been investigated. First, the taperd optical fiber is prepared by heating and pulling a single mode optical...
Analysis and Simulation of Diffraction from Metamaterials Structures by Using of Surface Integral Equations and Multi-Level Fast Multipole Method (MLFMM) and Comparison with Moment Method
Metamaterial is defined as an artificial, macroscopic, and effectively homogeneous structure (with an average unit cell size much smaller than the guide wavelength). In the electromagnetic literature, the response of a s...