THERMAL INSULATION MATERIALS WITH POROUS STRUCTURE
Journal Title: Structure and Environment - Year 2018, Vol 0, Issue 3
Abstract
The raw mix of silica-containing technogenic component – fly ash of thermal power plants – and the methods of preparing waterproof porous thermal insulating materials of extended application on its base according to the powder low-temperature technology has been developed using multifunctional properties of soluble glass as: a) a binding component; b) blowing agent; c) the raw mix hardening rate regulator. The physical and chemical, technological aspects of obtaining and using the suggested alkaline-silicate compositions have been considered.
Authors and Affiliations
ANATOLIY M. PAVLENKO, HANNA V. KOSHLAK
Keywords
Related Articles
- EP ID EP526564
- DOI 10.30540/sae-2018-025
- Views 71
- Downloads 0
PHOSPHORUS SOLUBILIZING BACTERIA – REVIEW ARTICLE
This article reviews the Phosphorus Solubilizing Bacteria, discusses the types of organic acids produced by them, as well as the impact on economy with non-renewable sources, such as phosphate rocks. In addition, the pho...
CALCULATIONS OF INDIVIDUAL AIR SUPPLY SYSTEMS
The article presents a method for calculating the amount of air flowing in and flowing out of the building. It included two variants: the first – the air inflow by infiltration and by the individual duct of the supply sy...
DIAGNOSTICS OF CONCRETE ELEMENTS AFTER THE FIRE
The paper presents selected methods for determining the influence of fire on the load capacity of concrete elements – diagnostics and damages arising after application of fire temperatures. The subject may not seem new i...
TEIGENVALUE PROBLEMS IN STABILITY OF INDUSTRIAL STEEL BUILDING WITH A HANDLING SYSTEM
The paper presents the eigenvalue problems of the stability of industrial steel buildings with a handling system. The aim of the calculations was to determine eigenvalues (critical forces) and corresponding eigenvectors...
TECHNOLOGICAL ASPECT OF BRICK PRODUCTION USING THE METHOD OF AUTOCLAVING
Production of sand-lime bricks using the autoclaving method is a well-known process, especially in Europe. During the autoclaving process, also called the hydrothermal treatment or hardening the materials with lime and/o...