Thermal Stability of Polyester Fabric with Polyacrylic Coatings
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 4
Abstract
The aim of the study was to assess the thermal properties of polyester (PET) woven fabrics with unmodified (PET/AC) and flame-retardant modified (PET/AC/FR) polyacrylic coatings, before and after 1, 5, 10 & 15 washes. Differential scanning calorimetry DSC and thermogravimetric TG/DTG analyses were carried out in order to investigate the thermal processes. To evaluate the effects of the modifications and washing treatment, the scanning electron microscopy SEM/EDS technique was used. The flame-retardant modification caused that the melting enthalpy and the initial thermal degradation temperature decreased and the thermal degradation heat increased. The washing of PET/AC and PET/AC/FR fabrics caused an increase in the melting enthalpy by approximately 12% and 63% and a decrease in thermal degradation heat by about 2% and 15%, respectively. It was found that the flame-retardants were rinsed out from the coating after the fifth wash.
Authors and Affiliations
Alicja Nejman, Irena Kamińska, Patrycja Giesz, Małgorzata Cieślak
Energy Release Studies of Human Feet for Mapping µPCM Quantity in Socks for Thermoregulation
Pure PCM and microencapsulated PCM (µPCM) were analysed for heat capacity and core content using DSC analysis and were tested for stability against heat and solvent. The energy release rate of human feet was quantified t...
Oznaczanie wydłużenia nitek osnowy w satynowych tkaninach bawełnianych przy zastosowaniu analizy obrazu
Analiza została wykonana w celu możliwości zredukowania zrywów włókien podczas przędzenia, a tym samym w celu zwiększenia produktywności krosien. Zastosowano wysokoczułą kamerę do analizy obrazów. Wydłużenia włókien osno...
Wytrzymałość statyczna i zmęczeniowa liniowych wyrobów włókienniczych
Prezentowana publikacja jest przeglądem prac kierowanych lub inspirowanych przez nieżyjącego Profesora Andrzeja Włochowicza na tle obecnego stanu wiedzy a opracowana przez jego współpracowników, jako wyraz pamięci i uzna...
Corrosion Behaviour of CuSn- and CuZnNi-coated Polypropylene Nonwoven
The intended purpose of metallised nonwovens is architectural shielding against electromagnetic fields. Therefore the aim of this work was to systematically investigate the corrosion behaviour of metallic layer/polypropy...
Surface Characterization of Low Temperature Plasma-Induced Cashmere Fibre by Air Gas
Low temperature plasma (LTP) processing technology was successfully applied to modify cashmere fibres and three kinds of assemblies were formed, i.e., weak-treated, optimised -treated and severe-treated ones. Treatment p...