Thermodynamic Analysis of Compatibility of Niobium Carbide with Hadfield Steel for Cermets Development
Journal Title: Фізика і хімія твердого тіла - Year 2014, Vol 15, Issue 2
Abstract
Hadfield steel due to its high wear resistance under impact conditions is currently being considered as perspective material for using as a binder phase in carbide – steels. One of the key factors in the selection of a refractory carbide component of carbide – steels is its chemical stability with respect to metal phase. In this study, chemical interactions between niobium carbide and Hadfield steel, were analyzed from thermodynamic considerations. It is shown that niobium carbide due to its low limited solubility in manganese austenite determines the structure of the two-phase steels with hardenable binder.
Authors and Affiliations
Ya. A. Kryl’, P. M. Prysyazhnyuk
Influence of a Hydrostatical High-Pressure on Plasticity of Solids
On the two-dimensional model of the crystal it was shown that the crystal lattice transform from stable to unstable under the influence of hydrostatical high pressure. As a result of such transformation is intensity the...
Edge Absorption of (Y0.06Ga0.94)2O3 Thin Films
Fundamental absorption edge of (Y0.06Ga0.94)2O3 thin films, obtained by radio-frequency ion-plasmous sputtering, was investigated using the method of optical spectroscopy. It was established that these films are formed i...
Application of the Mean-Field Kinetic Method for Description of the Reaction Diffusion
In this paper we present the results of modeling of the reaction diffusion in fcc structure between pure component A and orderedphase A1B1using the kinetic mean-field method. Theformationtime of the ordered phase A3B1 (i...
Classical Size Effects in Sb Doped SnTe Thin Films
The possibility of obtaining strongly degenerate (> 4×1020 сm-3) SnTe thin films (d = 200 - 2000 nm) with p-type conductivity by thermal evaporation in vacuum of SnTe crystals doped with Sb, with subsequent condensation...
Influence of the C4H6O6 Concentration in the (NH4)2Cr2O7 - HBr- C4H6O6 Composition on the Chemical-Dynamic Polishing of the III-V Semiconductors
The paper presents the results of experimental determination of the influence of the initial concentration of tartaric acid on the features of the chemical interaction of InAs, InSb, GaAs and GaSb with (NH4)2Cr2O7 - HBr-...