THREE-DIMENSIONAL MODELLING OF THERMAL STRESSES IN A PLANAR SOLID OXIDE FUEL CELL OF A NOVEL DESIGN

Abstract

The presented modelling investigation was carried out to analyze thermal stresses and expansion in an anode supported planar Solid Oxide Fuel Cell (pSOFC). The temperature distribution was based on previously developed thermo-electrochemical model predicting fuel cell operation. The designof a single pSOFC consisted of three ceramic layers of membrane electrode assembly: anode, electrolyte, cathode and two cross-flow bipolar plates with 26 ribs. The gases flowed diagonally from one cell corner to the opposite one. The fuel and air flows were cross-wise opposed on each bipolar plate side. The study allowed to indicate the most vulnerable to thermal damage area of the fuel cell in the operating conditions. The results will be useful in further design modification and performance optimization of the SOFC.

Authors and Affiliations

Tomasz Zinko, Paulina Pianko-Oprych, Zdzisław Jaworski

Keywords

Related Articles

ANALYSIS AND DETECTION POSSIBILITY OF THE PARTIAL DISCHARGES IN AIR INSULATED MEDIUM VOLTAGE SWITCHGEAR USING TRANSIENT EARTH VOLTAGE DETECTION

Modern switchgear increasingly use polymeric materials as insulation. Despite its numerous advantages they have limited resistance to partial discharge corrosion in some cases. In this paper noninvasive methods Tran...

MULTIVARIATE MAGNETIC FIELD ANALYSIS AND LEVITATION FORCE CALCULATION OF THE ACTIVE AXIAL MAGNETIC BEARING (AAMB)

The paper presents multivariate calculations of magnetic field and magnetic force in the active axial magnetic bearing actuator (AAMB).The field model has been developed using Finite Element Method (FEM) and has been use...

FRAKTALE W PROJEKTOWANIU KONDENSATORÓW Z POPRZECZNĄ POJEMNOŚCIĄ – WYNIKI POMIARÓW

W porównaniu do klasycznych kondensatorów z równoległymi okładkami użycie struktur z poprzeczną pojemnością pozwala na zwiększenie gęstości pojemności przy projektowaniu kondensatorów wtechnologiach CMOS. Kondensatory z...

NEEDLE DETECTOR OF X-RAY AND GAMMA RADIATION

The article presents the developed structure of the novel needle proportional gas detector (NPC – Needle Proportional Counter) used for the detection of X-rays and gamma rays. The advantage of the detector is its simple...

ANALIZA STRAT MOCY W WOLNOOBROTOWYM SILNIKU PNEUMATYCZNYM

Celem pracy jest opisanie nowego polskiego wynalazku silnika pneumatycznego według patentu PL 214371. W pracy przedstawiono budowę oraz zasadę działania, opisano stanowisko badawcze, wstępne wyniki pomiarów oraz wyznaczo...

Download PDF file
  • EP ID EP81450
  • DOI -
  • Views 122
  • Downloads 0

How To Cite

Tomasz Zinko, Paulina Pianko-Oprych, Zdzisław Jaworski (2016). THREE-DIMENSIONAL MODELLING OF THERMAL STRESSES IN A PLANAR SOLID OXIDE FUEL CELL OF A NOVEL DESIGN. Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska, 6(1), 69-72. https://europub.co.uk./articles/-A-81450