TOXICITY TEST OF WASTE OIL BEFORE AND AFTER TREATMENT USING PHYTOREMEDIATION ON BIOINDICATORS
Journal Title: Engineering and Technology Journal - Year 2023, Vol 8, Issue 12
Abstract
Silugonggo River is a river that crosses Juwana District, Pati Regency, Central Java, which empties into the Java Sea. Industrial activities and workshops around the Silugonggo River cause river water to become polluted with used oil.. Even though many people around the river use the Silugonggo River for daily activities, one example is as a place to find fish for side dishes and traded.. The purpose of this study was to determine the concentration of lead in river water contaminated with used oil waste and the LC50 value of 0-96 hours against bioindicators, namely tilapia (Oreochromis niloticus), before and after being processed using phytoremediation. This research phase includes: 1) toxicity tests before treatment consisting of: preliminary tests with waste concentrations of 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100%, and actual tests with waste concentrations of 15, 16, 17, 18, 19, 20, 21, 22, 23, and 24%; 2) The process of treating waste oil with phytoemidiation using water hyacinth and kale plants is tested for plant weight variations. Plant weight variations are 200 grams, 300 grams, 400 grams, and 500 grams, and the process of processing waste oil is carried out continuously; 3) Post-treatment toxicity test consisting of: preliminary test with waste concentrations of 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100%, and actual tests with waste concentrations of 42, 43, 44, 45, 46, 47, 48, 49, 50, and 51%. The results showed that the effective weight in reducing lead in water hyacinth plants and kale plants was 500 grams with lead weight being <0.0058 mg / L (under Quality Standards according to the Decree of the Government Regulation of the Republic of Indonesia Number 82 of 2001 concerning Water Quality Management and Water Pollution Control). The LC50 value of 96 hours of waste oil before processing is 19.66%. The LC50 value 96 hours after processing is 46.69%.
Authors and Affiliations
Ivan Agusta Prabawa Dwi Putra , Yuli Pratiwi ,Muchlis . ,
Keywords
Related Articles
- EP ID EP725742
- DOI 10.47191/etj/v8i12.15
- Views 55
- Downloads 0
On Optimization of Functional Parameters of Color Dimensions and Size Relations for Combating Resonance Disorders During Restoration
The calculation of the dependent for determining the optimal values of the vibrational coefficients of the transmission functional equalizing gears by non-circular gears in the fight against resonant vibrations in the ge...
UTILISATION OF SMALL INDUSTRIAL SOLID WASTE WELDING WORKSHOPS CARBIDE AS A RAW MATERIAL FOR GYPSUM (CASO4) PRODUCTION
In order to increase the effectiveness of the clean production program in the small carbide welding workshop industry, it is necessary to make efforts to reduce the existence of the waste produced because it pollutes the...
PREVALENCE OF MUSCULOSKELETAL RISK FACTORS AMONG TRUCK DRIVERS AT THE JORDAN PETROLEUM REFINERY COMPANY
An observational cross-sectional study was conducted on 283 truck drivers and 100 work site controls at the Jordan Petroleum Refinery Company (JPRC). All participants were males with experience ranged from 5 to 35 years....
RELIABILITY AND AVAILABILITY IMPROVEMENT TECHNIQUES FOR NIGERIA ELECTRIC POWER STATIONS
The maintenance of plant in the electric power stations involves an annual expenditure of millions of dollars and it is therefore essential to establish the cost-effectiveness of the present maintenance policies. The maj...
The Effect of Sintering Temperature on Graphene Oxide Reinforced Copper Matrix Composite Fabricated Through Powder Metallurgy Technique
Composite materials revolutionize engineering, seamlessly blending diverse components for enhanced strength and versatility. These advanced structures, combining fibers and matrices, redefine traditional material boundar...